Analysis of common problems in Jiuyang soymilk machine;
The indicator light is not on:
Cause 1: The position of the nose is wrong (the microswitch is not turned on).
Countermeasure: put the nose back.
Reason 2: Put too many beans or other materials.
Countermeasures: Put the materials according to the regulations and put them flat at the bottom of the cup. When the indicator light is on, the machine will not work.
Reason 3: There are no buttons.
Countermeasure: Press the function key.
Reason 4: There is no water in the cup or there is too little water.
Countermeasures: add water between the upper and lower water lines.
Reason 5: unplugging the power supply during work causes a long sound alarm.
Countermeasure: Follow the normal working steps.
Reason 6: The temperature sensor is faulty.
Countermeasure: Send it to the local after-sales service department for repair.
The motor keeps working;
Cause 1: water in the nose.
Countermeasures: Send it to the local after-sales service department for maintenance and heating.
Reason 2: There are no beans and rice.
Countermeasure: Put beans or rice.
Reason 3: Water enters the nose.
Countermeasures: Send it to the local after-sales service department to repair the motor.
Reason four: water enters the nose.
Countermeasures: Send it to the local after-sales service department for maintenance and heating.
Reason 5: There are no beans and rice.
Countermeasure: Put beans or rice.
Reason 6: Water enters the nose.
Countermeasure: send it to the local after-sales service department for repair? The key is not responding.
Reason 7: The power outage interval is short and the system has not been reset.
Countermeasure: Power off for 3 minutes and then power on.
Reason 8: too little water.
Countermeasures: add water between the upper and lower water lines.
Reason 9: The voltage is too low.
Countermeasures: you can use a home voltage regulator.
Beans or rice cannot be broken;
Reason 1: too little water was added.
Countermeasures: add water between the upper and lower water lines.
Reason 2: The voltage is too low.
Countermeasures: you can use a home voltage regulator.
Reason 3: The soaking time of beans is short.
Countermeasures: extend the soaking time.
Reason 4: There are too few or too many beans.
Countermeasure: Add raw materials such as beans according to the instructions.
Reason 5: The machine itself is out of order.
Countermeasures: Do not repair the overflow pot and send it to the local after-sales.
Reason 6: Press the wrong function key.
Countermeasure: Choose the function key correctly.
Reason 7: Lack of grain refiner.
Countermeasure: Install grain refiner. .
Reason 8: Soymilk is too thin or too much beans are added.
Countermeasure: add beans according to the standard. .
Reason 9: There is too little water.
Countermeasures: add water between the upper and lower water lines.
Reason 10: Machine failure.
Countermeasure: Send the soybean milk to the local after-sales service department for repair before it is cooked, and call the police in advance.
Reason 1 1: Too much water or other raw materials.
Countermeasures: add water between the upper and lower waterlines and paste the pot according to the standard.
Reason 12: The electric heater was not cleaned.
Countermeasures: clean the electric heater.
Reason 13: Too much rice or beans.
Countermeasure: Add rice or beans according to the regulations? Soybean milk processing time is too long.
Reason 14: Low voltage.
Countermeasures: household voltage regulator.
Reason 15: The water temperature is too low.
Countermeasure: Use warm water.