How did Skyworth Qingyue heat the air conditioner to 30 degrees for more than two hours, and it was cold wind, and the home was not warm at all. What happened?

The default working mode of Skyworth Qingyue air conditioner is "heating" mode. It is impossible to turn on the heating function by directly adjusting the air conditioning temperature. You need to switch the air conditioner to heating mode with the remote control to heat normally. The specific method is as follows:

1. First find the "Mode" button on the remote control of Skyworth air conditioner. This button is used to switch the working mode of the air conditioner.

2. Then aim the remote controller at the signal receiving port (located in the middle) of the air conditioner, and press the "Mode" button continuously to switch functions. There is no beep every time the air conditioner is turned on. )

3. Pay attention to the icon on the display of the remote control every time you switch. When the "heat the sun" sign appears, the air conditioner will successfully switch to the heating mode.

4. After a short wait, the air conditioner will blow out hot air. At this time, the required heating temperature can be adjusted by the air conditioner remote controller. This is the heating method of Skyworth Qingyue air conditioner.