In a blink of an eye, the meaningful internship life has ended. We must have learned a lot. It's time to write an internship summary. But what are the requirements for internship summary? The following is a summary model essay of engineering undergraduate internship I collected for reference only. Welcome to reading.
Summary of engineering undergraduate practice 1 After two weeks of production practice, I was deeply impressed. In terms of construction technology, the actual operation is based on theoretical knowledge, but it is more flexible and operable than theoretical knowledge. This requires learning professional knowledge, thinking actively and using it flexibly at work, so as to cultivate one's own thinking innovation and independent problem-solving ability. At the same time, I used this internship opportunity to get in touch with the society, got a good exercise, and made clear the direction I should develop in the remaining year of college life, especially the need to exercise my language communication and communication skills, study hard, work hard, and actively face every challenge.
Production practice is an essential practical teaching link in the teaching plan of civil engineering specialty, and it is the unity of theoretical knowledge and engineering practice. During the internship, I went deep into the construction unit as a technician, took a high-rise residential area as an internship place, participated in the engineering construction work under the guidance of the director of the technical office of the project department, and successfully completed the two-week internship task. At the same time, it also lays a good foundation for the engineering time after graduation.
Internship is a familiar and unfamiliar word to me, because I have experienced many internships in my ten years as a student, but this time it is so different. He will comprehensively test my abilities in all aspects: study, life, psychology, body, thought and so on. It is like a touchstone to test whether I can apply the theoretical knowledge I have learned to practice. It is related to whether I can succeed in this challenging society in the future, and it is also the key to building confidence, so my investment in it is also 100%! The intense one-month internship life is over, and I still have a lot of gains in this more than half a month. It is necessary to sum up after the internship. First of all, through two internships and practice, I learned a lot of practical knowledge. The so-called practice is the only criterion for testing truth. By being on standby, I closely observed the whole construction process and learned a lot of applicable and specific construction knowledge, which I seldom contact and pay attention to at school, but it is also very important basic knowledge.
Many new technologies and materials have been adopted in the construction of this project. The main structure is full cast-in-place shear wall structure, and there are hidden columns and beams in the wall, which increases the room area and headroom. In decoration, such as kitchen and bathroom, lightweight ceramsite concrete partition board is used. Compared with the previous brick wall, this partition wall has the advantages of light weight, simple installation and reliable strength, which not only greatly reduces the load borne by the cast-in-place floor, but also speeds up the construction progress, shortens the construction period and saves the cost.
In the process of acceptance of constructional column reinforcement, the design unit chose smooth round reinforcement in the adoption of vertical reinforcement, but the friction between the stirrup bound by the construction team and the smooth round reinforcement was too small in the construction process, which led to the stirrup slipping and brought inconvenience to the construction. So the construction team changed the smooth round steel bar into threaded steel bar to increase friction and facilitate the binding construction of stirrups, but this change greatly increased the cost. Through positive thinking, I put forward the following rectification plan to the director of the technical office: the four vertical rods of the concealed column are composed of two smooth round rods and two threaded rods, which are placed obliquely during construction and have endless knowledge. Through the results, I actively think about the causes and solutions of problems, so that I can learn more knowledge in my work, truly achieve a good internship effect of integrating theory with practice, and enhance my ability to analyze and solve problems in the process of dealing with engineering and technical problems.
It is necessary to sum up after the internship. First of all, through two weeks of internship and practice, I learned a lot of practical knowledge. The so-called practice is the only criterion for testing truth. Through practice, I have closely observed the whole building construction process and learned a lot of applicable and specific construction knowledge, which I seldom contact and pay attention to at school, but it is also very important and basic knowledge.
While studying and practicing many specific construction methods in and out of class, I also have a more real and in-depth understanding of many specific construction details and management processes.
In the process of construction project management, due to various disturbances, the specific management schedule and plan changes, as well as project schedule planning and evaluation are often inconsistent with the planned schedule. Measures must be taken to correct this deviation. We usually track and check the implementation of the progress plan, and take timely measures to solve problems when found.
Understand the construction progress and existing problems of the project through the ten-day monthly report of construction progress managed by the project management department. The engineer in charge of planning will go to the site to check the actual implementation of the progress plan, and attend on-site meetings regularly and irregularly to understand the actual progress of the project and coordinate the progress relationship of all parties concerned. In the pipe jacking project of Zhang Gui Zhuang Road, Zhonghuan Road undertaken by our company, our project department uses the crossing chart comparison method to compare the difference between the actual implementation of the project and the planned target.
When the project schedule deviates more than 10 days, we generally need to analyze the reasons for the deviation and whether the deviation affects the follow-up work and the total construction period. This analysis is carried out through the time scale network plan. After taking various measures to solve the problem of lagging progress, it is usually necessary to adjust the work order, change the logical relationship of some work, shorten the duration of some work, and adjust the original network plan by optimizing the construction period.
In practice, you can not only learn knowledge, but also learn how to deal with interpersonal relationships. The construction unit is a unit with complicated personnel, so we should treat people sincerely. When I first came, I met many new faces. Because I don't know them well, I dare not talk to them too much, and I don't know much about my work, so I began to feel uncomfortable. Later, I gradually found that as long as I treat people sincerely and consult my colleagues humbly, they are also willing to associate with me. He also taught me some skills, from which I deeply felt the importance of sincerity. In the company, I should not only learn how to do things, but also learn how to be a person. It is very important to correctly handle the relationship between colleagues, which will affect whether you can carry out your work. Narcissism doesn't mean you have personality. It is difficult to integrate into a large group if you are too lofty. Diligence and curiosity. When I first came to work, I was unfamiliar with many aspects, which required me to study hard and ask more questions.
Summary of engineering undergraduate practice II. We first visited Hudong Zhonghua Shipyard. Hudong Zhonghua is a merger of two enterprises, and it is currently one of the leading enterprises in the national shipbuilding industry. Through the history of the shipyard explained to us by the old masters, we understand her development process and understand that whether as an enterprise or a person, if we want to develop, we must seize the opportunity and strive for our own future.
As a large comprehensive enterprise, she has many branches. When the country was in trouble, she relied on her own strength, made wise decisions under the leadership, and Qi Xin, all the workers in the factory, worked together to gain a firm foothold in the world shipbuilding industry. Many ship types in Hudong are well-known in the world, and the research and development are actually started from scratch, which are all worked hard by the masters. As a large state-level enterprise, she has her own tasks and trained many elites in shipbuilding industry for the society. She has never asked the country for a penny, but she is quietly contributing to the country. Now the factory not only undertakes the shipbuilding requirements of the world's major shipowners, but also builds military ships for the country and contributes to our national defense cause. The spirit of Hudong people infects each of us, and we are proud of having such enterprises in our country!
At present, the main brands in Hudong are 74,000-ton and 74,500-ton bulk carriers,1/kloc-0,000-ton oil tankers, vlcc and various steel structures. These brands basically monopolize the international market. They are all developed and manufactured by Hudong, and they also have many patents of their own. At present, the main equipments in Hudong are 360x92 1 large dry dock, 2 sets of 600t gantry cranes,10.2000t floating dock,10.2000t and 7000t slipways, and 3 slipways below 20000t. She is also more advanced in software development and application in the same industry. In addition to using the advanced ship design system software and cad/cam technology of tribon in Sweden and ptc/cadds in the United States, she also has a leading Chinese information management system of Hz-CIMS independently developed in China. At the same time, the company has more than one qualification certificate 100, and has passed the certification of ccs, abs, lr, dnv, gl and other classification societies. Because of this, Hudong is working hard to develop and hopes to build a world-class shipbuilding base with its own efforts.
In Hudong, we visited various workshops, and saw the fragments being processed in the workshops, which made our knowledge more stereoscopic and intuitive, and many things we didn't know before were now clear at a glance. We also saw all kinds of advanced welding technology in the workshop, which made us understand that the current technology is like this, and it is not as hard as we thought. Of course, welding or outfitting in some places may still be done by hand, but shipbuilding is relatively advanced and efficient. From the deformation, welding, assembly and painting of a steel plate, we can intuitively understand the shipbuilding process. This process enables us to see what the so-called lines on the drawings are and what those symbols represent, which is very helpful for us to understand and remember this thing, much better than just remembering the drawings.
In class, the old masters told us a lot of methods and tools that are being used in the shipyard now. Take the seemingly simple problem of bending the steel plate into the shape we need. In fact, according to the different parts of the ship, the curvature of the ship is different and the bending method is different. Simply put, it is divided into mechanical forming and thermal forming, and machinery is divided into many different steel plates. Different curvature starting devices are different. The main equipment for mechanical forming is the plate bending machine, which is used to process the cylindrical surface or conical surface of the plate. Press bending machine, used for bending plates, folding edges or automobiles; Bending machine, used for processing beams, ribs, etc. And thermoforming is to use chemical principles to bend the plate into the shape we want under different heating conditions. We have all seen these equipments in the workshop, and the operation of the masters has made us realize the present technology. For some things that are not in books, such as some symbols, the masters at the scene have also explained them to us, which can be said to be fruitful.
On the Huangpu River, we visited Hudong's wharf, and several warships docked and under construction also made us feel Hudong's contribution to the country. Although we didn't visit their dock, because after all, it involves security, trade secrets and so on, we also saw vlcc, the most advanced ship type in the world, and its high technology from a distance. High added value and long life. There is a lot of profound knowledge in it. The masters also gave us a brief introduction, which made us feel that the burden of shipbuilders is still very heavy. After all, many patents and equipment are imported, and if we are unable to produce, we will be restricted by others. I hope one day we can develop our own imported ultra-low temperature resistant steel. Hudong is also learning while manufacturing, perhaps according to shipbuilding technology. He divided the things of a ship very carefully, and each work department was responsible for its own piece. The division of labor is clear, and it is obvious where the responsibility is when something goes wrong. Relatively speaking, I feel that the management mode of Waigaoqiao is more scientific. After all, workers are motionless, they are always doing what they do. If they are skilled, their efficiency will be much higher, their responsibilities will be clear and they will not be easy to delay. Therefore, he built ships quickly and earned a high income. In today's integration of shell, shell and coating, a good management model is undoubtedly the premise of enterprise development.
Summary of engineering undergraduate internship 3 In a blink of an eye, the two-month internship period is coming to an end. Looking back on these two months' internship, I was deeply touched and gained a lot. In the past two months, under the care and guidance of leaders and colleagues, I have learned rare work experience and social knowledge through my unremitting efforts. I will summarize my work practice in mineral processing post from the following aspects:
First, study hard, integrate theory with practice, and constantly improve your working ability.
In the practice of mineral processing post, I always regard learning as an important way and method to acquire new knowledge, master methods, improve ability and solve problems, and earnestly arm my mind with theory, guide practice and promote work. Only by actively thinking and actively using your existing knowledge in social practice can we test the usefulness of knowledge in practice. During the two-month internship, my biggest feeling is that we have learned a lot of theoretical knowledge in school, but rarely used it in social practice, so that theory and practice are greatly out of touch, so that we can't find the direction in our future study and life, and apply what we have learned. At the same time, continuous learning at work is also an effective way to make up for one's own shortcomings. In the information age, society is changing and people are changing. If you don't study, you will fall behind. Through two months' practice, combined with the actual situation of mineral processing post, I have carefully studied the policies, management systems and work regulations of mineral processing post, so that the difficulties in my work can be solved most effectively. Through the study of these work regulations, I have further deepened my understanding of all the work and been able to carry out all the work pragmatically.
Second, highlight the key points of work, highlight the key points, and do your duty.
In the mineral processing post, I treat every job with a serious and responsible attitude. Although at first I felt that I couldn't find anything to do and get the purpose of exercise because of my lack of experience and understanding, I quickly started to find reasons from myself, communicated with my colleagues, and realized my own shortcomings, which made me quickly change my role and work orientation. In order to make myself familiar with the work and enter the role as soon as possible, on the one hand, I took the time to consult relevant information and get familiar with my job responsibilities, on the other hand, I humbly asked leaders and colleagues to give myself a more systematic and comprehensive understanding of the work of mineral processing posts. According to the actual situation of mineral processing post, combined with its own advantages, we should grasp the key and difficult points of the work and try our best to complete the tasks of mineral processing post. During my two-month internship, I was often praised by my colleagues and leaders.
Third, change your role and devote yourself to your work with great enthusiasm.
When I entered the mineral processing post from the university gate, it was difficult for me to adapt to the change of role at first, and I couldn't find the problem and solve it. I thought there was not much to do, so I was a little disappointed, and my initial enthusiasm faded a little, and I couldn't find the direction at all. But I still try my best to keep my original enthusiasm and want to do useful things, and keep doing some chores. At the same time, I also have the courage to help my colleagues do all the work, slowly find my role and understand what I should do. This is a passionate question. As long as I keep great enthusiasm, I believe I will be recognized. There is nothing I can't do, nothing I can't do well, only you are willing to do it. Changing one's role, from a student to a staff member, is not only a change of role, but also a change of concept.
Fourth, cultivate team spirit and cooperate with other colleagues while completing their own work.
In the workshop, I can gain the full trust of the leaders, and at the same time, I can actively assist other colleagues to deal with some housework while completing all the work assigned by my superiors on time. Only when the individual's ability is integrated into the team can the greatest value be realized. During my internship, I fully realized the importance of team spirit.
The essence of the team is * * * progress. Without progress and cooperation, the team is like a mess. Cooperate with each other, and the team will work together in Qi Xin to become a strong collective. Many people often confuse teams with working groups. In fact, there is an essential difference between the two. Excellent work groups, like teams, have the characteristics of sharing information, ideas and creativity, making decisions to help each member work better, and strengthening personal work standards. The working group mainly decomposes the work objectives into individuals, which is essentially around personal goals and responsibilities. The goal of the working group is just a simple sum of personal goals. Members of the working group will not be responsible for the results beyond their own obligations, nor will they try the value-added effect brought by multiple members working together.
Problems with verbs (abbreviation of verb).
Although some efforts have been made in recent months, there is still a big gap from the requirements of the leaders, such as the need to further improve the theoretical level and working ability, and the unfamiliarity with the post of mineral processing. These problems are determined to be improved and solved through the internship report in my future work and study, so that I can do my job better.
Summary of engineering undergraduate internship 4 I graduated from North China Institute of Water Resources and Hydropower in July 20xx and came to Henan Power Transmission and Transformation Construction Company. On September 22nd, I was assigned to the unit and joined the glorious electrician team. But I know that I am not qualified to be an electrician for the time being, and I need to study hard with an open mind. After this year's internship, I feel that I have made great progress in work, study and thinking. Now I will make a simple summary.
Before entering the factory for training, the organization department arranged for me to assist the summer work of the Youth League Committee of the company. For example, youth extracurricular activities training classes, summer club summer parties and so on. Although this internship has nothing to do with my major at school, I still take every job very seriously.
Next, attend the pre-factory education and training arranged by the company's organization department. During the training period, the enthusiastic introduction, education and training of experts and leaders from the technical department, quality assurance department, safety supervision department and labor department of the company made me have a new understanding of all relevant aspects of the company, and then I participated in the pre-job training for college graduates of electric power system arranged by the provincial company. After military training in the army and listening to lectures by experts from provincial companies, I further exercised my mental perseverance, enriched my knowledge and broadened my horizons. These education and training have made me deeply feel the company's concern and expectation for our new employees, and to some extent, they have become one of the driving forces for me to study hard and be positive in my future work, laying a good foundation for setting foot on the internship position.
After being assigned to the Fifth Construction Team, on June 65438+1October 65438+June 6, 2004, I went to the 220kV Shang Yong Line Project which was in the erection stage with curiosity and enthusiasm for transmission line construction. I set out that morning and arrived at the construction team in the evening. Fortunately, although the accommodation conditions on the construction site are not as convenient as anything in the city, in my own opinion, having food and shelter and being clean and tidy are the best conditions. No matter whether we are students or not, no matter how wonderful our past campus life is, as an employee of Henan Power Transmission and Transformation Company, we should be more concerned about how to do our job well. When I arrived at the station at night, the team leader found me a bed. As soon as my luggage was spread out, I lay down and slept. I got up at half past five the next morning, and it was raining. I thought this weather might not work, but things were not what I expected. As soon as the big truck that took us to the construction site stopped, the master and the migrant workers got on the bus first, and I quickly squeezed in. Only when I went up did I know that the car was full of construction equipment and mud everywhere, and there was no place to stay. I was standing there, and when the car was about to leave, a master pulled a piece of plastic sheet for me from nowhere, so I had to sit on the edge of the cold and muddy carriage and hold the plastic sheet. After the car left, it rained even harder. I was shivering at the edge of the carriage, so I had to squat down in the carriage. People in the car spread out a large piece of plastic cloth, people around the car pulled it by hand, and I also pulled a corner on the side. At that moment, I realized the hard work of our power transmission and transformation master, which I never dared to think about before. But it also occurred to me that maybe there are more bitter things waiting for me than this. It was just dawn when we arrived at the construction site, and we didn't call it a day until dark. When I got home, it was almost eight o'clock.
In the next month, I followed the masters to set up a spanning frame to protect the wires. And understand that the setting of the frame should follow the principle of "horizontal and vertical", and it seems easy to protect the wires. In fact, I must always concentrate on reporting the situation to the traction field and tension field at any time, and I must deal with the problems in time and try my best to ensure the normal pairing.
At the construction site, I humbly learn from the masters. I never pick and choose the work assigned by the captain and the captain. I treat everything with humility and seriousness. Take screwing the screw, you can't use too much force, but you still have to meet the torque requirements. When screwing the anti-theft cover, be sure to aim the anti-theft cover at the screw. If you accidentally twist it, it will be very troublesome. There are still many such things, which require me to continue to maintain a modest and prudent work style in my future work. Technology and experience are one aspect of everything, and the attitude towards work is also a very important issue.
After coming back from Shangqiu, I participated in the measurement training arranged by the company's education department, and achieved excellent results in the final examination. During the training, I mainly learned some measurement theory knowledge and simple operation of instruments. This knowledge also needs to be carefully practiced in actual construction.
After the engineering training, he rushed to Guangdong to participate in the construction of 500 kV Tianguang four-circuit power transmission and transformation project. During the internship, in addition to doing some data copying, data collection and calculation, with my humble opinion and the enthusiastic help of the masters, I have a further understanding of the construction of transmission lines. At the same time, due to my own professionalism and personal experience, I have a deeper understanding of the hardships and strict requirements of transmission line construction.
Under the enthusiastic and patient explanation of the master, combined with the actual situation of the design and construction of Tianguang Fourth Ring Road, we have a certain degree of conceptual understanding of the key points and important projects of quality control. For example, the specification and quantity of anchor screws in foundation engineering, foundation surface quality, column section size, overall torsion and center displacement of foundation, opening of foundation root, height difference of foundation top surface, pre-height of corner tower foundation top surface, eccentricity of anchor screws, angle steel inclination, etc. In the iron tower project, the bending of the main material between nodes, the pre-inclination of the tower structure at the end of the corner tower in the opposite direction of stress, the fastening degree of bolts, anti-loosening and anti-theft and contact with the surface of components, and the penetration direction of bolts, etc. Sag in stringing engineering, installation quality and technological requirements of accessories, and limitation of conductor damage degree, etc. In order to learn the above aspects better, I always carry relevant reference materials, standards and norms with me, and practice while learning.
After participating in stringing construction, I have a certain understanding of the main work such as tension field layout, traction field layout, tight line and flat hanging. In the fourth loop project of Tianguang, I was also responsible for the measurement of grounding resistance of most towers and the treatment of grounding resistance defects of individual towers.
In stringing construction, I used to be responsible for the protection of a section of conductor. It was hot at that time, but it happened that I had just burned on the protected road for a day, and my clothes were soaked with sweat, and my body and face were covered with wood, carbon black, oil stains and dust, which were sticky, but I persisted. During the second pay-off, after careful explanation by the master, the operator was fully responsible for the operation of the small tension car and successfully completed the task of pulling the traction rope.
During the re-inspection of the completion, when the operating unit suggested that the steel foot of the porcelain bottle of a foundation linear tower in our company was crooked and asked to replace the porcelain bottle, I immediately went up the tower and slid down the porcelain bottle, and actually observed that the porcelain bottle skirt itself was a little crooked, not the steel foot was crooked. After consulting with the operating unit, they accepted our point of view and corrected this defect.
In addition to internship at the construction site, from June+February, 5438 to the end of the project, with the support of the project manager and chief engineer, and with the help of the masters, I have been responsible for writing monthly project briefings and timely project reports. During my internship, I accumulated nearly 10,000 words of project reports and internship feelings, which won the praise of leaders and colleagues.
The powerful iron tower and silver wires set off the deep blue sky. This is a strange beauty. Only artists can make such excellent works, and these artists are our lovely Henan power transmission and transformation people! On the high iron tower and conductor, every movement is safe, steady and just right! I know this move is by no means a three-day and two-month effort. It is accumulated with the establishment of high-quality projects in Henan power transmission and transformation for many years, and it was honed by our Henan power transmission and transformation workers in the cold and hot summer. In my eyes, our collective is a melting pot. Working here, we have the careful guidance and patient education of the company's professionals. What is even more rare is that the old workers and many professional construction workers of the company are always infected with my earnest and meticulous spirit. In the future work, I will learn more modestly, often learn lessons, sum up experience, constantly improve my business level and be an excellent power transmission and transformation employee.
;