1 can realize high-precision rolling.
* The whole rolling mill includes a motor and a platform with an inclination of 45 degrees, so as to complete horizontal and vertical alternating rolling;
* The high rigidity of the rolling mill is conducive to rolling high-precision products;
* Bevel gear and worm drive eccentric sleeve are used to adjust the roll gap, and the encoder feeds back the adjustment information, which has the function of online adjustment of roll gap to ensure the accuracy of products and the uniformity of load.
2. It is convenient to change rollers and grooves.
*CCR mill roll is similar to the traditional double arch roll, and the roll body can be configured with multiple grooves to reduce the number of roll changes. When changing the groove, the roll box moves as a whole without changing the rolling line, and the overall operation is simple and convenient, and the groove change only takes 5 minutes;
*CCR roll box is assembled on the transmission box, and the roll changing operation is actually the replacement of the whole roll box. When replacing the roller box, open the shrink cylinder on the transmission box, remove the fixed lock on the roller coupling, lift the roller box as a whole, and directly install the pre-installed new roller box. The speed is very fast, only about 10 minutes.
3 pass the ball with strong adaptability.
When rolling small products, CCR mill is a pre-finishing mill group; When rolling large products, the CCR of the front stand is the pre-finishing mill set, and the two behind it are the finishing mill sets. Pass system is ellipse-circle system. When rolling different specifications, finished products with different sizes can be rolled through some stands. Therefore, the adaptability of the pass is very strong, and the product specifications cover smooth wire with a diameter of 5.5~42. 0 mm and ribbed steel ribs with a diameter below 14 mm