The problems of scaling and microbial mucosa in central air conditioning condensers have not been completely cured for a long time.
The rubber sponge ball cleaning method is to use a slightly larger special rubber sponge cleaning ball to automatically circulate in the condensation tube every once in a while. The ball rubs against the tube wall and takes away the dirt on the tube wall. This is by far the most effective and thorough physical method of keeping the condenser clean for a long time. But how to ensure that the rubber balls are automatically recycled and never get stuck in the condenser tube is the key to technology. The automatic cleaning and descaling system of the central air conditioning condenser is the best technical method.
The main components and functions of the automatic cleaning and descaling system for central air conditioning condensers
PLC controller: Commands the system to periodically operate the entire process according to a certain program to achieve cyclic cleaning of rubber balls Work.
Rubber sponge ball: Relying on the power of cooling water, it automatically removes sediments, microbial films and dirt on the inner wall of the condenser tube.
Glue ball recovery device: Automatically separates rubber balls from cooling water. The recycler has a visual window to observe the rubber ball recycling status.
Rubber ball injector: Automatically injects cleaned rubber balls into the entrance of the condenser, forcing the rubber balls to circulate again.
PLC controller rubber sponge ball rubber ball recovery device rubber ball injector
Operation process Open the injection valve, the injector pumps the rubber ball into the condenser inlet, and high-speed flow cooling The water brings the rubber balls into the condenser tube. The slightly larger rubber balls rub against the inner wall of the condenser tube and take away the dirt. After being intercepted by the recycler, the rubber balls are separated from the cooling water. After being vigorously washed by the cooling water, they enter the PLC control cabinet and are concentrated, waiting for the instructions of the PLC controller to prepare for the next time.