Insulation and decorative integrated panel TDD anchor installation steps

Shaanxi Insulation and Decoration Integrated Board Manufacturer Special Anchors for Insulation and Decoration Integrated Boards Special Anchor Products for Insulation and Decoration Integrated Boards: Used for fixing between external insulation integrated boards and increasing the stress area of ??screws , making the board and wall stronger. Adaptable to a wide temperature range: 800℃-1400℃. Anchors come in various forms: straight-shaped, cross-shaped, and L-shaped. Features: Reasonable anchoring structure, firm and reliable anchoring. ?Construction: Installation is simple and fast. The main fixing methods for thermal insulation decorative integrated panels include adhesive and anchor combination, dry hanging and fully bonded. 1. According to the construction requirements, the external wall insulation system of the thermal insulation and decorative integrated board adopts a combination of bonding and anchoring, that is, the thermal insulation and decorative integrated board is fixed on the base wall. This method is often used in engineering and is safer and more reliable. TDD patented anchors can be installed on the side or inside of the thermal insulation decorative integrated panel, so that the thermal insulation decorative panel can be firmly fixed on the exterior wall of the building. 2. The dry-hanging type is to fix the keel on the base wall. The integrated insulation and decorative panel is connected to the keel through metal connectors or special anchors. The seams of the external wall insulation system of the integrated insulation and decorative panel can be made of extruded board, benzene board or Other materials seal. 3. The fully bonded type means that during the installation process of the thermal insulation decorative integrated board exterior wall insulation system, the thermal insulation decorative integrated board and the base wall are only connected by bonding, which is called the fully bonded type. According to design needs, point-bonding or full-bonding can be used, and the board joints are sealed with mortar caulking material or other caulking materials.