1. With bright colors and bright surface, it is the most decorative guardrail series product.
2. No need for painting and maintenance.
3. Have sufficient strength. It has better strength and toughness than wood. Rails and heavy-duty guardrails are reinforced with galvanized profiled steel or coated with special PVC materials, so that the guardrails can give consideration to the strength of steel and the beauty of PVC.
4. The installation is simple and quick. Using patented socket connector for installation can greatly improve the installation speed.
5. Tougher than wood, more elastic and high impact resistance.
6. It is harmless to people and animals, even if it accidentally touches the guardrail, it will not hurt people like the steel guardrail.
7. Long service life. The service life of PVC guardrail is guaranteed to be more than 15 years. Because of the special formula and special anti-ultraviolet absorbent, it will not fade, yellow, peel, rot, crack, blister and moth.
8. Because there is no need for maintenance, the trouble of maintenance and management is saved, and the comprehensive cost is lower than that of wood and steel guardrails.
Energy consumption of 9.9. PVC profile is only114 of steel, which is an energy-saving green product.
Widely used in:
Decoration, beautification and safety protection works of urban roads, real estate, development zones, residential quarters, gardens and various enterprises and institutions.
Installation of PVC guardrail:
A, guardrail guardrail installation instructions
1. Before the fence guardrail is installed, it is usually the lower foundation that has been built by civil engineering and delivered with brick or concrete. The guardrail can fix the steel pad of the column in the center of the lower foundation by mechanical expansion bolts and chemical screws, and make it uniformly distributed in a straight line.
2. If the foundation of the lower part of the fence has not been formed, it is suggested to increase the length of the steel lining of the column and directly bury it in the wall, and the construction can be officially started after the wall curing period; Or after laying prefabricated embedded parts on the wall plane, the steel lining of the column and the embedded parts are welded together by electric welding. The characteristics of these two methods are stronger than bolt connection, but we must pay attention to straight lines and horizontal lines when presupposing.
3. The spacing of the steel lining of the column should be consistent with the design size, so as to ensure that the pre-assembled semi-finished products can be connected with it.
4. Draw the lower limit of two parallel lines in the whole linear distance as the benchmark for installation and adjustment. Ensure the smoothness of the upper and lower ends of the guardrail after installation.
5. The transverse and rigid steel linings of the guardrail have been installed and connected before leaving the factory, and the reinforcement fittings of each stress point have also been installed in place. In the field construction, it is only necessary to connect and fix the transverse lining of the guardrail with the column.
Second, the road isolation guardrail
1. The road isolation guardrail has been assembled in series according to the order requirements before leaving the factory. After the product arrives at the construction site, it is only necessary to insert the steel lining of each column into a stable base and arrange it in a straight line according to the requirements of the user department.
2. After the foundation layout is completed, connect the guardrails with special bolts.
3. In order to improve the wind resistance and prevent the cypress fence from moving maliciously, the stable base and ground should be fixed on the ground with internal expansion bolts.
4. Install a reflector at the top of the guardrail according to the user's requirements.
5. Movable cast iron seats can be locked symmetrically with spikes or expansion screws.
Third, the stair guardrail
1. According to the column fixing method of "fence guardrail", the steel lining of the column is fixedly connected with the ground.
2. Draw parallel lines at the upper and lower ends of each column, and measure the upper and lower included angles with a protractor.
3. Select accessories according to the angle requirements, and cut and assemble the inclined guardrail according to the angle requirements.
4. For the installation of guardrail and column, refer to the practice of isolating guardrail.
The pvc isolation bank guardrail has smooth surface, delicate feel, bright color, high strength and good toughness, and the aging test can reach 50 years. It is a high-quality PVC guardrail product. Will not fade, crack or become brittle when used at -50℃ to 70℃. With its high-grade PVC as the appearance and steel pipe as the lining, the elegant and bright appearance is perfectly combined with the tough internal quality.
Summary: The commonly used colors of PVC guardrail are white, gray, wood grain, dark blue and pink. There are many kinds of PVC guardrails, which can be used not only as guardrails in various places and traffic roads, but also as desks, chairs, pavilions and flower stands. Users can choose any one according to their own preferences.