Sincerely ask all netizens, how to operate the Zhongke two-color and four-color pad printing machine?

Specifically explain how to operate each function, then you'd better ask them to explain, but generally you can't get it without buying a machine! Zhongke pad printing machine, to be honest, I have never used it. I am most familiar with Kent's pad printing machine. The principle is the same, but the buttons are different. Understand the following principles, as long as you are familiar with the switch button of the machine, you can get started quickly. In fact, the machine can learn by itself in one day! According to the oiling methods, there are two types of pad printing machines: oil pan machine (the air pollution caused by scraping ink on the plate with an ink knife is very serious, and it is rarely used now) and oil cup machine (a kind of cup-sealed ink scraping oil on steel plates or steel plates, which is less volatile and more environmentally friendly). Its workflow: scraping oil-taking oil-printing pressure-cleaning monochrome printing: 1, loading. 2. Place the printing plate on the ink platform of the pad printing machine and adjust the correct position. 3. Choosing the right glue head for product printing depends on the pattern size, dot or solid color. First, it depends on the size of the pattern and the hardness of the glue head. Dot patterns can be hard. 4. Adjust the rubber head to the position close to the center of the pattern, and it is best to choose the blank position of the pattern when the rubber head falls. 5. Adjust the oil absorption depth, that is, press the glue head on the printed board to completely pick up the pattern. Printing depth, rubber printing on the product can completely press the pattern on the product. Clean the depth. If there is ink, adjust the depth until the glue head can be completely bonded. Generally, better machines have this device. The rubber head is pressed on the single-sided adhesive paper to clean up the residual ink after printing on the rubber head. Monochrome machine basically completed the adjustment of this step! 6. Adjust the position of the pattern on the product when printing. At this time, you can put a product on the fixture, paste transparent tape, and then try to print it down to compare the position of the product design and adjust the X.Y direction that the fixture workbench can set. The difference between two-color or multi-color pad printing machine and monochrome printing machine is that a movable push rod is added to push the whole workbench to the designated position for printing accurately! Adjustment method: After installing the printed board, repeat the above steps of 1-5. Arrange the color position and sort the spot colors according to the actual requirements. When printing four colors, the colors are arranged from light to dark, Y yellow, M red, C blue, and Black K. The multi-color main purpose is to adjust the position of the push rod, and the position is determined by one person. When adjusting the machine, it can be adjusted by printing multiple "X" lines on the printed board so that each "X" line overlaps. (Note: In theory, the overlapping of "cross" lines means that the position of the pattern is correct. In fact, the rubber head will be deformed, although the position should be moved when the pattern is found deformed in printing. ) basically, the adjustment of the printing press is like this! I won't say much about ink. There are many online! This is my previous work experience. Come on ~ I hope I can adopt!