One-click connection of smart phone
To connect the NFC function, you need to install Android 4. 1 or higher NFC-compatible smartphone.
1. If the smartphone screen is locked, please unlock it and set the NFC function of the phone to on. It can be opened in the drop-down menu.
You can also choose to turn on in the settings.
2. Take out the units on the right side of R and the left side of L from the charging box, and the earphone will be turned on automatically.
3. Touch the smart phone with the bottom of the charging box, touch the N sign at the bottom of the charging box, and keep the smart phone in contact with the charging box until the smart phone responds.
4. Follow the instructions on the screen to complete the pairing and connection.
5. When the headset is connected to the smartphone, the blue indicator light starts to blink slowly. At this time, you will hear the voice command "Bluetooth connection". To disconnect, please contact your smartphone again.
point out
If you can't connect headphones, try the following methods.
If the smartphone screen is locked, unlock it, and then slowly move the smartphone on the N mark.
If the smartphone is in the box, please take it off.
If you touch an NFC-compatible smartphone with the bottom of the charging box, the smartphone will terminate the Bluetooth connection with any current device and connect to the headset.
When the headset is turned off, it is impossible to connect the headset with the smartphone by opening the headset through one-button connection. To turn on the headset, press and hold the buttons of the left and right units at the same time for about 2 seconds until the indicator light flashes.
Heart of the King 2 Click on the demo.