What are the fc elimination steps of Kelon Air Conditioning?

When the "FC" flashes on the display screen of Kelon air-conditioning indoor unit, it means that the machine is performing the "filter screen cleaning prompt function", prompting that the filter screen needs to be cleaned. Some products will beep while displaying "FC", which needs to be explained to the user. This is not a machine problem, and FC is not a machine fault code. It is a normal function of air conditioner to prompt that the filter screen needs cleaning. 1 and FC indicate that the air conditioner should clean the filter screen, which is a humanized prompt function. This is a code name of Kelon air conditioner; After the fan in the air conditioner runs for 200 hours, it will enter the state of filter cleaning prompt, and FC prompt will appear. 2. It is very important to keep the filter clean, and the function of not prompting will make people continue to use it in a harmful state. After cleaning the filter, just press the reset switch (emergency). If you don't understand, please read the air conditioning manual. 3. Press the key on the remote controller (press the high-efficiency key continuously for 5 seconds, and the remote controller sends out a cleaning reset code) to clean and reset the filter screen; (This plan is the master plan) 4. The filter screen can be cleaned and reset by operating the "panic button" on the indoor controller; In the state of cleaning prompt, press "panic button" once to reset and cancel the cleaning prompt, and panic button will resume its function. 5. After exiting the cleaning prompt state, the air conditioner will return to its normal appearance and running state, and the accumulated timing of the fan will be reset. FC appears, which is Kelon's patented technology-the filter screen is full of dust, prompting to clean the filter screen, and the word FC disappears after cleaning! If you don't clean it up in time, the word FC will appear every time you turn it on!