Connect the HDMI output interface of the decoder to the monitor. The decoder supports HDMI interface. If you need to connect the monitor with VGA or DVI interface, you need to use a patch cord.
Connect the computer and decoder to the same LAN. The decoder supports two Gigabit Ethernet ports, and the two network cards work in "multiple access mode", that is, the two network cards work independently, and the corresponding management IP addresses are different, so they can connect to different networks. When the computer is connected to the decoder, it is necessary to pay attention to which LAN port the decoder is connected to, and use the corresponding management IP for management.
Secondly, log into the decoder interface.
The initial management IP address of LAN 1 of the decoder is192.168.1.242, and the initial management IP address of LAN2 is 192. 168.2.242. You can also view the management IP of LAN 1 in the upper left corner of the display connected to the decoder.
The HTTP port of the decoder is 80. Please configure the management computer with the IP address of the same network segment as the management IP of the connected decoder LAN port, then open a browser and enter the corresponding management address, as follows:
When logging in to the WEB management interface of the decoder for the first time, you need to set the administrator password. If the administrator password is set, just enter the user name and password, and then click Login. The administrator user name is admin.