☆OLY-530 1 OLAYI Plaster Scope of application:
The whole exterior wall of the building is waterproof and impervious; Underground buildings; Elevator shafts, canals, warehouses, toilets, edible and inedible pools, etc. ; The floor is waterproof and moisture-proof, and you can stick tiles to make it waterproof.
☆ Oly-53065438+
○ The coating is dense, breathable and impermeable;
○ High coating strength and short curing period;
○ Strong adhesion to the base surface, stable volume, low shrinkage, crack prevention, strong impermeability of the coating and long-term immersion;
Odorless, non-toxic, non-flammable, environmental protection, strong weather resistance;
○ High strength and good affinity, and the protective layer can be omitted;
○ Ready to use with water, easy to construct, and easy to ensure the engineering quality.
☆ Basic surface treatment:
○ The substrate must be solid and flat. The surface must be clean, free of dust, oil, shedding, release agent and other debris.
○ All small cracks can be stirred into a wet mass with water or powdered cement mortar, and then smoothed. Yin and Yang angles should be drawn as arcs or obtuse angles in advance.
☆OLY-530 1 Ollie Welfare Cement Construction Method:
Used for waterproofing of bathroom, kitchen, bathroom wall and external wall (interface layer and waterproof layer);
○ Interface layer: Scrape a layer of beneficial cement mortar as waterproof interface layer (thickness is about 1-2mm) on the clean and wet base, and spread it out for compaction.
○ Waterproof layer: Immediately after scraping the interface layer, scrape a layer of beneficial cement mortar as the waterproof layer (about 2-3mm in thickness). The scraping direction should be 90 degrees with the interface layer, and it should be spread out and compacted during scraping.
Used for waterproof bonding of various decorative tiles;
○ Single brick pasting: When pasting ceramic tiles, scrape a layer of beneficial cement mortar (about 4mm in thickness) on the cleaned base surface or brick back surface, paste it from top to bottom or from bottom to top according to elastic lines or hanging lines, and caulk it with caulking mud after the bonding layer is finally set.
○ Double-sided plastering: When waterproof requirements are met, double-sided plastering can be adopted, that is, scraping a layer of mortar (about 2-3mm thick) containing Yili glue on the base surface, scraping a layer of PA-A mortar (about 2-3mm thick) containing Yili glue on the back of the brick for pasting, and caulking with mortar after the glue layer is finally set.
☆ Precautions:
○ Lime cement containing lime cannot directly cover the coating of this product, and must be coated with interface treatment agent to enhance adhesion.
○ Within 24 hours after coating, protective measures should be taken to prevent people from walking, getting caught in the rain, frost and exposure to the hot sun.
☆ Normal dosage of OLY-5301OLAY cement:
2 ~ 4 kg/m2, the actual dosage depends on the smoothness of the base surface and the construction habits of workers.
☆ Storage:
Stored in a cool and dry place, the shelf life of unopened products is one year.