Most importantly, Tesla valves do not require the assembly of any moving parts. It is a valve without any switch, which is more wear-resistant and durable and can be made of various materials.
This kind of valve Tesla is called valve catheter, and later people call it Tesla valve. Tesla valve is a kind of pipeline with complex internal structure, which consists of a series of alternating pipeline branches. Each branch is divided into two pipes, one of which is slightly inclined and the other is bent into a semi-ring. A connecting channel and a sealing device are also arranged between the two parts for discharging fluid from one pipeline to the other. If all pipe sections are working properly, they must be of sufficient length. The following series have the same number of branches, and the number of branches can be increased or decreased as needed.
This causes the fluid to flow into the pipeline from the front basically unimpeded, but from the other direction, the fluid from the annular branch collides head-on with the fluid from the inclined branch, thus hindering the flow of liquid. Therefore, in practical application, in order to prevent the backflow of liquid in the pipeline, a valve must be set to limit the flow into the nozzle end. As shown in figure 1, when the valve needs to be closed, just press the button to open the valve. After several branches, little liquid can flow out of the nozzle, or even be controlled not to flow out, thus playing the role of a check valve.
When Tesla invented this valve, it had no real use for the time being. This magical valve was slowly forgotten because it could not be used, and no one did more research. However, Tesla valve does have something to think about and explore. Until now, no one has studied it.
Tesla/KLOC-Valve invented 0/00 years ago.
Today we will discuss the design concept and specific application of Tesla valve. First of all, we must understand the structural principle of Tesla valve. At present, we have not found the actual application scenario of Tesla valve.
Is the thing invented by Tesla's god really useless garbage? If so, what harm will it bring? This sounds a little incredible. But we have something like Tesla around us. For example, Tesla valve is one of them. Researchers at new york University recently discovered that Tesla's valve may be much bigger than Tesla thought.
The researchers conducted many tests with Tesla valve and found that with the increase of flow rate, Tesla valve is more effective in preventing backflow, which is very useful when the flow rate needs to be accurately controlled. This technology also helps to reduce the noise of turbocharger and improve fuel efficiency. Tesla valve was developed by a company in Massachusetts, USA, and is currently in the experimental stage. Its structure is similar to that of a traditional valve. This means that Tesla valve can be used in engines and other turbines to pump out fuel, coolant, lubricant and other gases and liquids through its inherent vibration.
Tesla/KLOC-Valve invented 0/00 years ago.
In the previous demonstration, the researchers also found that the flame will accelerate the combustion during the injection through the Tesla valve. Does this also apply to rocket engines? But in fact, this idea is wrong, because Tesla valve is not the real Tesla valve. In fact, Tesla valve is just a simple nozzle structure. Compared with other types of injection devices, its biggest feature is its high speed.
Tesla valve designed for rocket fire pipe, even if it is curved or spiral, will significantly improve the eruption speed and rocket thrust? At present, scientists have not fully understood this magical valve, and more research is needed to decipher this century-old industrial design invention.