2. Derusting coating requires that the surface derusting of steel plates, profiles, castings and forgings reach ST2 level in GB8923. The film thickness is 90-120 μ m. All exposed machined surfaces should be rusted before leaving the factory. The surface is coated with antirust primer and dark gray topcoat, and the guide rail is not painted.
3. Control box system: The control box is made of steel plate, which is beautiful and practical. The surface is treated with antiseptic. The thickness of the box is not less than 2 mm, and it has a good cooling device. There are practical inspection lights in the control box, and the door lock is firm and reliable, which is convenient to use and does not interfere with each other.
4. Equipment configuration: various famous industrial components should be selected to fully ensure the overall reliability of the equipment.
5. Frame system: Frame structure, which consists of longitudinal beams, transverse beams and steel plates, and the steel plates are laid on the workbench. The profiles and steel plates used meet the corresponding national standards.
6. Transmission system: the motor drives the reducer, transmits power to the rotating device and drives the turntable to rotate. All components are reliably connected with the main body. The motor adopts brake motor, with protection grade IP44 and insulation grade E. ..
7. Equipment structure: The turntable car consists of frame, turntable, driving device and control box. The main body of the turntable is equipped with a guide rail. The turntable is composed of a rotary configuration and a workbench produced by introducing advanced German patented technology, which can rotate 90o. It has the characteristics of flexible rotation, rapid response and safe and reliable performance. The automatic deceleration control of rail docking is realized by frequency conversion governor, and an electronically controlled safety limit device is installed between two positions of 90o to ensure the accurate positioning of the turntable when it rotates, so that the fuselage guide rail is well centered with the ground rail; An auxiliary supporting wheel set is arranged below the turntable to ensure the safety and stability of the turntable.