What are the main components of emery wear-resistant flooring materials?

Wear-resistant flooring materials are commonly known as wear-resistant materials. The components of wear-resistant ground materials are divided into: color special alloy aggregate dry paving ground hardening agent, color gold aggregate dry paving ground hardening agent and color mineral dry paving ground hardening agent. The wear-resistant floor is made of wear-resistant materials consisting of nonmetallic mineral aggregates, metallic mineral aggregates and special additives. When the concrete is initially set, spread, smooth and polish the wear-resistant materials with a trowel. Wear-resistant floor has the advantages of high surface hardness, high density, wear resistance, no dust, no peeling, economy and wide application range. It abandons the traditional practice of separate construction of concrete base and surface, thus eliminating the common quality defects such as cracks and hollowing caused by poor combination of base and surface, simplifying the working procedure, shortening the construction period and saving the labor cost, and is more and more widely used in steel structure workshops. The colors of wear-resistant floor materials are cement, gray, green, red, blue and yellow. Wear-resistant flooring products should be stored in a dry state for six months after packaging. Wear-resistant floor materials are suitable for concrete floors that need wear resistance and dust reduction, such as industrial workshops, heavy machinery factories, garages, squares, airports, warehouses, parking lots, docks, etc. The essence of emery floor is also a kind of cement product, which is the product of mixing high-grade cement with quartz sand of different grades. Of course, it has the characteristics of cement products: free Ca+ and Mg+ are constantly precipitated from pores, producing dust; Due to the loss of water at the end of hydration, a large number of pores are produced, which further leads to non-compactness, so its strength and wear resistance are greatly weakened. Because the thickness of emery is generally 3 to 5 mm, it is very easy to fall off. If the blanking time is not well grasped. After the thickness of this layer is worn, the cement below will begin to ash, so after one year of use, even if there is waxing maintenance, scratches and wear will inevitably occur. Emery ground material is a dry ground hardening agent, which is pre-mixed in the factory and can be used on site. It is mainly composed of high-strength cement, inorganic wear-resistant aggregate, pigment powder (cement has no primary color) and additives. Aggregate is sandy, with an average particle size of 65438±0.5mm, accounting for about 60% of the total; Cement is treated high-grade cement. Besides the natural color of cement, there are many colors to choose from, such as red, yellow, green and gray. The aggregate component of the hardener is natural ore. This is a non-rusty nonmetallic aggregate with a hardness greater than 8 Mohs hardness. Except for natural mineral aggregate, the weight of other cement and pigments shall not exceed 25% of the total weight. This product is directly applied to the surface of concrete or cement mortar in the initial setting stage, and forms a hard, wear-resistant, dust-free and beautiful hardened floor after smoothing.