What are the famous bottle blowing machines abroad and their prices?

Ma Zhou: Jomard) 1968, the third blow molding expert, founded in the United States, 1969 began to provide injection blow molding machines (hereinafter referred to as injection blow molding machines) to the plastic industry. Ma Zhou provided the world's first commercially feasible and fully tested injection-blowing machine with mold. 1990, Ma Zhou built a factory building in New Jersey, covering an area of about 4 1000 feet, and manufactured about 50 injection-blowing machines every year, which are widely used in packaging production industries such as medicine, medical care, daily chemicals and food, as well as the production of personal health care products and industrial tools. Over the years, Mazhou Company has continuously introduced new models of injection-blowing machines and constantly updated or adopted new technologies to better meet the needs of users and promote the development of packaging container industry. 1995 Ma Zhou Company invested and set up a factory in Italy to produce extrusion blow molding machines. Although it entered the field of extruder late, especially in Europe, there are many companies in this field, but with years of strong technology accumulation, application and market experience, especially the ability to combine new technology with market application, its business has grown steadily and the company has continued to grow and develop. So far, the extruders produced by Italian Mazhou factory have been sold all over the world. Zhang Wenyang, sales manager of China Mazhou Company, said that if the long-term return brought by investment and high technology is considered, the company's equipment should be the best choice. He said that it is good to see that more and more consumers in China are willing to pay for high quality. Ma Zhou's IBM series is an injection blower. According to Manager Zhang, due to its unique technology, our injection-blowing machine has the characteristics of no blank cutting, accurate size, uniform wall thickness, smooth surface, no waste in production process and few auxiliary machines. In addition, the production cycle of the equipment is short, the production capacity is large, and the automation degree of the equipment is high, so considering long-term operation, the total investment and use cost are low. Ma Zhou's EBM series is an extruder. Models with single station and double station; The production container can reach seven layers; Adopt the famous Mueller extruder head; Wall thickness control adopts Moog and Jefferen switch control system; ..... the application of in-mold labeling technology; Patented hydraulic transmission design, thus greatly reducing energy consumption; ..... the application field is food; Drinks; Dairy products; Daily chemical products; Pesticide chemical industry; Auto parts, etc. It can be said that this is a machine with excellent cost performance. The clamping force of Mazhou injection-blowing machine ranges from 12 tons to 200 tons. Advanced functions, such as: programmable process control equipment, optional power supply and optional plasticizing screw; PE, PS, PP universal screws; Two-step pressure blow molding of PVC, PP and PC screw tachometer 15, 000psi pre-blowing (for PVC) heating zone vibrating mirror blowing continuous discharging plasticizing screw hydraulically driven multipoint digital temperature display multipoint hydraulic display ANSI/SPI B15.21.1.986 Safety protection photoelectric parison detector running time recorder Ma Zhou extrusion blower can be used for processing HDPE, LDPE, HMW-HDPE, PC and PP. The injection stretch blow molding machine provided by Aoki Institute of Aoki, Japan, made of PVC, PETG and other materials, takes its patented technology "Direct Heatcon" as the core technology, realizing the purpose of producing high-quality plastic containers directly from raw materials. Its model is suitable for PET, PES, PC, PA, PP, HIPS, PEN and other materials. , widely used in packaging production of cosmetics, medicines, beverages, washing products, seasonings, drinking bottles, car wax/engine oil and other industrial fields. The so-called "direct temperature adjustment mode" refers to the direct extension of blow molding by using the heat retained in the molding process of bottle blanks, thus saving the energy consumption required for reheating, shortening the cooling time of bottle blanks and realizing the miniaturization configuration of cold water equipment. In addition, one-step bottle blowing has the following advantages: 1. The container is produced directly from raw materials, which saves the cost of material management and bottle embryo transportation, and also reduces the risk of bottle embryo damage or pollution during transportation. 2. Directly control the temperature distribution of the bottle blank in the mold cavity, so that the bottle blank has the most suitable temperature for stretch blow molding and the thickness is uniform. Generally speaking, reheating is easily affected by various variable factors (temperature and humidity, material state, etc.). ), and it is difficult to produce a unified container. In order to prevent the occurrence of defective products, it is necessary to take a larger safety margin-increase the thickness of bottle embryo. This increases the weight of the container to a certain extent and wastes raw materials. Aoki's bottle blank forming technology thickens the part that needs to be extended and thins the part that doesn't need to be extended, so it doesn't need safety margin and the product is lightweight. 3. The Aoki molding machine takes only 4 seconds from taking out the bottle blank to stretch blow molding, and the turntable rotates 120 degrees. Many processes required by the two-step method are omitted, which is helpful to greatly reduce energy consumption. Aoki's Aoki series bottle blowing machine can also directly perform injection-stretching-blow molding by using the recycled materials of crushed and cleaned PET bottles, without using the traditional PET re-granulation recovery system, thus saving the cost required for recrystallization. And the product quality is also very high. Aoki's spokesman pointed out that the rise of PET bottles in recent years is because they are lighter and safer than glass bottles, without the environmental protection and harmful characteristics of PVC bottles. Besides, its transparency enables consumers to see its contents clearly. These advantages make PET bottles more and more popular in many packaging applications. Its spokesman also pointed out that the international crude oil price rose sharply, which led to the rise in the price of PET materials. Packaging container manufacturers are therefore keen to reduce the weight of products of various specifications. In line with this trend, Aoki has developed containers with a volume of 1.5 liter and a weight of 16 gram, containers with a volume of 1 liter and containers with a volume of 750 ml and a weight of1gram. The walls of these containers are as thin as a film and are easily crushed. Therefore, it is very environmentally friendly in terms of material saving and garbage disposal. Aoki Research Institute introduced a soft and ultra-light container with a lid at the 2005 Asian Beverage Exhibition, named Ugly Duckling. Compared with ordinary containers, it saves half of PET raw materials, and can be kneaded into dough by hand after being discarded, thus reducing the volume of garbage. No matter from any aspect, it is an economical and environmentally friendly product. It is called "ugly duckling" because it is easily crushed, unable to stand after filling, and there are a series of thorny problems in molding, filling and listing. But it was developed in response to market demand, and it has many additional values different from traditional bottles. One of the advantages is that this model can produce containers with large radians and is convenient to carry. Secondly, the bottle mouth that is not in the center and the bottle body that is easy to squeeze are convenient for pouring out uniform and viscous liquid quickly. Moreover, because air is not easy to remain in the container, if it contains oxidizable products, it can ensure that it will not deteriorate after long-term use. In addition, its products feel very good, which can be described as soft and good. A spokesman for the company also revealed that they attach great importance to the China market and hope that with China's accession to the WTO, they will serve more customers in China and bring them good profits. Some upgraded models of Aoki bottle blowing machine are equipped with gas recovery system: part of the compressed air used for blow molding can be recovered to the gas storage tank as the compressed air for operation, thus saving 15-30% of the compressed air. Rapid circulation structure: the upper and lower dies of the bottle embryo forming mold are opened and closed synchronously, which can shorten the idling period by nearly 2 seconds, which is about 10- 15% shorter than the previous forming period. Strong blow molding system: The upgraded model is equipped with a series of strong blow molding systems (the blow molding force can reach 3MPa), which is more suitable for the stable production of complex bottles. Dual-purpose hot runner: In the past, bottles with different lengths were replaced, and the nozzles of hot runner should be replaced. On the currently upgraded model, it is only necessary to adjust the number of pads under the blow molding equipment without replacing the nozzle. This can not only shorten the mold replacement time, but also greatly reduce the cost of the mold hot runner. Increase of injection pressure: By increasing the injection pressure by 25%, the thin-walled bottle embryo can be formed stably. The forming of bottle blank with the wall thickness of 1.9mm brings light weight and high speed. Yaqi: The products are fast and complete in specifications. Hong Kong Yaqi Group was founded by Dr. Tan on 1974. Now it has developed into a group enterprise with more than 1500 employees, integrating blow molding machine, blow injection mold and blow molding products. Its headquarters in Hong Kong covers an area of over 25,000 square feet, which is the core of the company's overall planning and development of overseas markets. Its Yaqi Industrial Park in Kaiping, Guangdong Province covers an area of more than 200 mu. It is a large-scale and perfect R&D and manufacturing base of bottle blowing machinery, bottle blowing machine mold, precision injection mold and blow molding products. In addition, Yaqi also has a bottle blowing machine factory in Shenzhen, covering an area of 65,438+0,200,000 square feet. The grand scale makes Yaqi occupy an important position in the bottle blowing industry in China and even the world. Yaqi bottle blowing machine can produce medical bottles as small as 1 ml and large containers as large as 1000 liter. Therefore, Yaqi products have a wide application market. Cosmetics and personal cleaning products production industry is an important market of Yaqi bottle blowing machine, accounting for about 40% of its total output, including the largest Procter & Gamble factory in the world. Other markets include industrial oils, toys, industrial accessories, medicines and pesticides. Geographically, 70% of Yaqi's products go to the export market, and only 30% are sold in Chinese mainland, but this 30% production has already accounted for a large share of the domestic market. Dr. Tan said that because Yaqi pays attention to the research and development of high-quality machines, she has been focusing on overseas markets. In recent years, with China's accession to the WTO, more and more companies have sold their products to the international market, so Yaqi began to focus on expanding the domestic market. Dr Tan pointed out that product quality is an important guarantee for China enterprises to gain a firm foothold in the international market. And "if a worker wants to do a good job, he must sharpen his tools first", so it is very important to make good use of the bottle blowing machine and maintain long-term stable orders. Therefore, in order to help promote the bottle blowing industry in China, Yaqi plans to expand its sales in China. Yaqi will adopt the method of installment payment, and strive for some manufacturers who can't afford to buy high-quality but expensive equipment. For example, customers only need to pay 80% of the price of ordinary machines in advance, and then they can buy back a better equipped device, and the rest will be paid in installments. When our reporter asked whether this move would bring too many bad debts to the company, Dr. Tan said, "I believe that good machines will bring better benefits to manufacturers. And if the benefits are good, the manufacturers will not be stingy with the mantissa. " Yaqi's AO-50SN and AO-70SN models are high-quality automatic in-mold labeling and bottle blowing machines. It integrates wall control, double-layer extrusion and in-mold labeling technology, and has advanced, efficient and reliable characteristics. In 2000, he was awarded the Excellence Award of Equipment Design by Hong Kong Chinese Manufacturers Association. 200 1 was awarded the patent certificate of utility model by People's Republic of China (PRC) and China National Intellectual Property Administration. As early as 1987, the thin-wall control technology of Yaqi bottle-blowing machine won the "New Product Award of Computer-controlled Automatic Bottle-blowing Machine with Automatic Wall Thickness Adjustment" issued by Hong Kong Chinese Manufacturers Association. "Little prodigy" is one of Yaqi's best-selling products. The machine is simple in structure and affordable, which not only meets the needs of rapid production, but also is easy to operate. The standard model is equipped with a nozzle recycling conveyor, and the blow-molded products will be sent out along the chute, fully automatic. Its special design is most suitable for batch production of small containers as small as 1 ml, and can also be used to produce products with a volume of 16 ounces. The machine provides single, double and three molds for customers to choose from, thus realizing different batch production. If it is used for medical supplies, you can also choose a special mold made in the United States. Under normal circumstances, the three-die blow molding cycle is 7-8 seconds, and the successful blow molding volume of 18 mm high PE medicine bottles can reach 70,000 bottles/day. In addition to PE materials, "prodigy" is also suitable for PP, PETG and PVC materials. In addition, because this model adopts an adjustable pressure device, the pressure is only started when necessary, so the energy consumption can be reduced by nearly 50%. Yaqi's latest model is its "whirlwind" quick translation series, and its "whirlwind 800" model can automatically produce 10 molds and 20 cavities, with an output of up to 6000 pieces per hour. In order to keep up with the development of international bottle blowing industry, keep abreast of the latest technical information of bottle blowing machines abroad and facilitate the communication with overseas customers, Yaqi has hired many American experts. Dr. Tan pointed out that in the future, those machines with low automation and slow production speed will be gradually eliminated because their cost/profit ratio is not competitive. Low price and low quality is not the best choice for future development. Yaqi has a machining workshop with an investment of more than 70 million yuan, including a Japanese machining center with a value of more than 6.5438+0.2 million yuan and other Japanese high-quality equipment. Good processing level ensures that every component of Yaqi products reaches high precision. In addition, in order to ensure the long-term stable operation of the machine, other high-tech accessories that need to be outsourced are advanced suppliers from Germany and so on. Talking about the future development of the company's bottle blowing machine equipment, Dr. Tan revealed that Yaqi has started to develop the model of PET bottles, and it is expected that mature and competitive PET bottle machines will be launched within two or three years. Yaqi's successful management for so many years comes from its excellent management concept. Dr. Tan believes that China's traditional culture pays attention to human feelings, while the western management philosophy pays attention to practical results. In order to achieve management success, we must organically combine the two. Visiting Yaqi Industrial Park, you can not only see the modern factory building with perfect equipment and orderly operation, but also a whole set of living environment such as karaoke hall, football, basketball, small golf factory and staff dormitory. In addition, Yaqi has more than 20 sales and service outlets throughout the country. Each machine can be customized according to customer's orders, such as product, output and delivery time.