How to change the gas spring of double-screen display bracket

1. Press the upper stop with the thumbs of both hands, and at the same time, squeeze the middle of the display screen in four inward directions, and compress it down to about the width of one hand.

2. Place the compressed air spring between the piston and the top plate, and make sure that the trademark font of the capsule shell is upward.

3. Fix the lower port on the annular seat on the piston, and fix the upper port on the annular seat under the top plate.

4. Pressurize the air spring so that its upper and lower ports are accurately installed between the top plate and the piston.

5. When the monitor is lowered, the air spring will automatically roll down along the piston. End of installation.