When we decorate, the place we need to focus on preparing is the bathroom, because the water and electricity pipes here are very complicated, and bathrooms are basically sunken now. If the operation is improper or the backfill material selected is incorrect, There could be a lot of trouble down the road!
1. Why do bathrooms need to be backfilled?
Many of our rough houses are designed as sunken bathrooms. The bathrooms are 30~1000px lower than the rest of the indoor floor. If they are not backfilled, the water will be exposed. Surface, the thickness of the ground is only so much, and the drain of a toilet is tens of centimeters. At this time, it is necessary to fill the sunken floor part of the bathroom with light materials so that its height is only slightly lower than the other floors of the house. The bathroom backfill is In order to seal the ground pipes and maintain smooth indoor circulation.
2. What are the traditional backfill materials?
1. Overhead backfill
The operation method of the structure is relatively simple, and it can also reduce the load of the floor, and One advantage is that if it is elevated, the water pipes below will not be squeezed, making future maintenance easier.
However, there are also serious problems with overhead backfilling. If it is overhead, we need to do a good job of waterproofing, otherwise it will be bad if water leaks and water accumulates in the overhead layer.
2. Construction backfill
Construction waste backfill is currently not recommended because construction waste actually contains a lot of water chestnuts, which can easily scratch the water pipes inside.
3. Ceramic backfill
Ceramic backfill is currently a more commonly used backfill material in the market. First of all, its body is very light and will not bring too much damage to the floor. Secondly, it has a certain degree of water absorption. If there is a small amount of water leakage, it will be absorbed by the ceramic particles.
However, when backfilling, we need to pay attention to filling it accurately, otherwise there may be a possibility of subsidence of the backfilled ceramsite later, resulting in subsidence or cracks in the ground. In addition, the price of the backfilled ceramsite will be higher.
Attention! ! High energy ahead
Brand new backfill material, Fu Minle brand "Guard Army Backfill Guard" is strongly settled.
So how can the "Guards" be foolproof?
1. A technologically revolutionary backfill material with four patents;
2. The product has super fluidity and can reach dead ends that cannot be reached by the caisson waterproof layer, and can wrap pipes to extend them. Long service life; the material itself will never leak! It can solve the worries of bathroom leakage for a long time;
3. It has obtained domestic and EU environmental certification and does not contain benzene, alcohol and other harmful substances;
4. It is cast in one go, without gaps or interruptions, and can achieve the same service life as the main project;
5. The compressive strength is 0 82MPA, reaching the national compression standard;
p>
6. A standard bathroom can be constructed within 2 hours. 7. One cubic meter weighs 300kg. 8. The comprehensive cost is not high and it is more cost-effective than similar backfill materials on the market.
Guard backfill is a new type of material that is safe and environmentally friendly. After I tested goldfish and kept them in Guard material for half a year, there were no abnormalities!