The thickness of cast-in-place floor slab and wall is an important index to evaluate the safety performance of buildings, which has been paid more and more attention by relevant state departments. Quality supervision and testing units at all levels are also very concerned about the nondestructive testing technology of floor and wall thickness, but for a long time, there has not been a high-precision nondestructive testing instrument that meets the requirements. The traditional borehole measurement method not only has large error, but also is inaccurate and time-consuming and laborious. Beijing Haichuang Hi-Tech, relying on its long-term rich experience in the research and development of engineering measuring instruments, has successfully developed a floor thickness gauge, which breaks through the traditional testing methods, achieves the testing accuracy beyond imagination and gives you a refreshing feeling. The transmitting probe and the receiving probe are respectively placed on the upper and lower sides of the floor to be measured. The value displayed on the instrument is the distance between the two probes. Just move the receiving probe. When the instrument shows the minimum value, it is the thickness of the floor.
Special instructions:
★ The transmitting probe and the receiving probe are wireless, and there is no connecting wire between them;
★ The transmitting probe is supported by a free rod with adjustable length;
★ In order to facilitate the contact between upper and lower operators, the instrument is equipped with a walkie-talkie.
Detailed introduction of accessories:
Supporting software: the instrument has powerful analysis and processing software, and can make corresponding test reports with PC WINDOWS.
Configuration list and quotation:
1. Moderator 2. Launch probe 3. Receiving probe 4. Probe connection cable 5. A data transmission line 6. Instrument extension rod 7. Software CD 8 Intercom 9. Probe charger 10. Instructions, certificates, warranty cards and instrument boxes.
Main functions:
It is specially used to measure the thickness of non-metallic concrete or other non-ferromagnetic media such as walls, columns, beams, woodceramics, etc.
Main features: error less than 2mm, international breakthrough. Looking for a national patent: 1. Double-sided nondestructive testing, the floor does not need any treatment and coupling agent; 2. The test speed is fast, and 3-5 points can be measured every three minutes on average;
3. The test accuracy is high, and the instrument digitally prompts and guides the alignment probe; 4. The thickness can be displayed directly without analysis and conversion, and the results can be stored and printed.
Technical indicators:
1, thickness measurement range: 50-350 mm.
2. Thickness measurement accuracy: 50-200mm error1-2mm; 201-350mm with an error of 3mm.
3. Data storage capacity: 2000 measuring point data (including building number, unit number, measuring points and thickness value) can be stored.
4. Working environment: temperature 0-40℃, humidity:
5. Power supply: 9VDC(6 5th batteries) of the main engine and 9VDC(6 5th batteries) of the transmitting probe.
6. Instrument volume: host 225× 150×50(mm) transmitting probe: φ 100× 120(mm).
Receiving probe: φ50×80(mm) extension rod: φ25×600(mm)
Relevant regulations:
People's Republic of China (PRC) national standard Code for Acceptance of Construction Quality of Concrete Structure Engineering (GB50204-2002)
The floor thickness gauge is an important instrument for measuring the thickness of nonmetal, concrete or other non-ferromagnetic media such as walls, columns, beams, wood and ceramics. The floor thickness gauge can measure without damaging the sample. Compared with the traditional measurement method, its measurement value is accurate and the error is small.
Non-metallic plate thickness tester
product usage
Used for automatic measurement of nonmetallic plates (such as concrete,
Rock and soil, glass plate, etc. ) thickness, belt thickness measurement,
Data analysis, data storage and output functions are integrated.
This intelligent portable, easy to use, accurate measurement.
Thickness measuring instrument.
According to the instruction
People's Republic of China (PRC) national standard
Code for Acceptance of Construction Quality of Concrete Structure Engineering (GB50204-2002)
operating characteristic
The test distance is large. The test distance is as high as 800mm, and the test accuracy is better than other similar products.
Display measurement information in real time. The floor thickness value is automatically interpreted and locked without manual participation, which greatly improves the testing accuracy.
The test speed of the instrument is fast. Our company adopts high-speed processing platform, which can quickly judge the thickness of the floor.
The probe has long service life. The bottom of H5 1 floor meter probe adopts high-quality wear-resistant layer, which greatly improves the service life of probe and instrument.
Save the test date. User-friendly data management.
Portable universal telescopic rod. The design of telescopic telescopic rod and universal joint is adopted, which is very convenient for field use.
Powerful professional Windows data analysis and processing software. The test results can be represented graphically, and the Word test report can be generated directly, which is convenient and fast.
Technical indicators
Thickness measurement range: 40 mm ~ 800 mm.
Indicating maximum error: 40 ~ 600 mm1mm.
60 1 ~ 800 mm 2mm
Data storage capacity: 32,000 groups of measuring points
Working environment requirements
Ambient temperature:-10℃ ~+40℃ Relative humidity:
Electromagnetic interference: Without strong alternating electromagnetic field, there will be no long-term direct sunlight.
6 No.5 alkaline batteries, with power supply time exceeding 30 hours.
Data processing software
Off-board software has powerful data analysis and processing functions. USB port transmits data; The data can be statistically analyzed according to the specifications and a preliminary conclusion can be drawn; Up to 6 text reports can be generated; The grid data and profile data of the test can be visually displayed to users in the form of charts; Data can be imported into Excel, which is convenient for users to analyze and process in the next step.