Excellent heat insulation performance
Ouzhe doors and windows are made of broken aluminum, and the hard-plastic connection greatly improves the thermal insulation performance of the material. The metal characteristics of aluminum alloy make it conduct heat quickly, while the heat insulation performance of broken bridge aluminum is excellent, which can effectively isolate the transmission of indoor and outdoor temperatures.
The sound insulation effect is remarkable.
The broken aluminum structure of Ouzhe doors and windows has been carefully designed with tight joints, and the air sound insulation capacity can reach 30-40db. In addition, the sound insulation glass spacing of Ouzhe doors and windows also directly affects the sound insulation effect. For example, its sliding door glass can be 27mm hollow, which can ensure quiet and warm indoors even in downtown.
Fashion bicolor collocation
Ouzhe doors and windows The new broken bridge aluminum doors and windows can be matched with two colors, and the inside and outside colors are different. Take the broken bridge window as an example, the color outside the window is consistent with the color required by the community, and the color inside can be selected according to the indoor style, adding a different style to your home.
Reserve holes of appropriate size.
When installing doors and windows, size of the hole of doors and windows should be reserved, and the elastic connection should be firm. It is not allowed to bury the window frame of the door directly into the wall, and other operation methods should be used around the hole or at the joint.
The components are firmly connected.
When installing the assembly, the connection should be firm, the distance between two adjacent aluminum alloy doors and windows should not be greater than 400mm, and corrosion-resistant filling materials should be used. When installing hardware, the matching hardware should be used for connection and installation.
Anti-shedding measures
In order to prevent doors and windows from falling off, adjustable limit cards and other anti-falling measures should be set up during installation. There should be no obvious deformation of sliding doors and windows after installation, and the door leaf should be closed tightly and flexibly. The measured value of lap joint between window frame and door frame should meet the design requirements and should not be less than 6mm.