The motor power is 200kw.
Power supply 380V/50Hz /3-phase
Service coefficient 1. 15
The protection grade is IP54, which is more suitable for dusty environment in the wild.
Dashboard layout
digital voltmeter
Digital ammeter
Main engine exhaust pressure gauge
Main engine exhaust thermometer
hourmeter
power light
Unit operation indicator lamp
Oil filter clogging indicator light
On/off control and continuous adjustment control changeover switch
Unit loading switch
Before separation, separate the rear pressure switch.
Start button
stop button
Main engine exhaust system
Flange connection is adopted between the exhaust nozzle of the main engine and the oil separator, which can effectively prevent oil leakage in long-term use of high-pressure single-stage units.
Gas supply system
One 2 "ball valve and three 1/4 ball valves are enough for users to connect various devices.
Taper R thread is easier to seal, has long service life and is not easy to leak.
On the simple side of the separator, reduce the exhaust resistance.
Temperature control valve
The new temperature control valve patented by Ingersoll Rand can effectively prevent the temperature control element from misoperation or non-action (blocking), ensure the compressor to operate in a suitable temperature range, and more reliably extend the service life of lubricating oil and main engine.
Mechanical unloading carriage
The old air switch is a manual switch. The higher the voltage, the more difficult it is to switch.
The electromagnetic air switch used in this unit can be easily controlled by hand or button, and a circuit breaker is installed at the same time, which greatly increases the safety.
Mobile screw air compressor
Gas treatment system
Stepless air intake regulation system, which can be adjusted within the range of 0- 100%.
The unit cover is designed according to the principle of cold box.
It can form efficient cooling air flow, and the working environment temperature is as high as 52℃.
Safety lug of the whole machine
Single point lifting and locking protection to prevent unauthorized movement.
Intake air filtration system
The equipment is equipped with a two-stage air filtration system to ensure that the air compressor will not be damaged by dust and dirty particles. When the filter needs to be replaced, Yinni display will remind you in time.
Self-designed cooling system
High performance plate-fin cooler
The margin of cooling area is increased to ensure the cooling effect.
The maximum ambient temperature can be as high as 52℃
(The motor instructions suggest that it is best not to run in an environment above 46℃ for a long time. )
Safety protection
Compressor exhaust temperature protection: > 120℃
Overload protection of main motor
Overload protection of fan motor
Power supply phase sequence error or lack of phase protection
Oil filter clogging alarm
electric cabinet
Large-capacity contactor can adapt to unstable excitation voltage.
Waterproof design of box body
Large internal space and good heat dissipation performance of components.
Mechanical unloading carriage
Waterproof design box can prevent rain from entering when stopping (it is forbidden to start when it rains).
The lower part of the wire is convenient for wiring, and at the same time, it keeps a distance from the surrounding staff to ensure personal safety.
maintain
The front and rear service doors are easy to maintain.
Mobile screw air compressor
10-20.7 bar, 23.5 m/min-electric
High machining accuracy, minimum air leakage, small wear and long service life.