Question 1: What are the commonly used boards for furniture now? ①Solid wood board: As the name suggests, solid wood board is a board made of complete wood. Advantages: Strong and durable, with natural attractive texture, it is the most natural and environmentally friendly furniture panel currently. It is the best choice for home decoration. Disadvantages: The cost of the board is high, the process requirements are strict, it is easy to deform if not mastered well, cracking is almost unavoidable, and the fireproof performance is relatively unsatisfactory, so it is not used much in decoration. Solid wood boards are generally classified according to the actual name of the board, and there is no unified standard specification. Different tree species have different wood hardness. Solid wood boards are becoming more and more rare and expensive, so now more and more high-end furniture is being developed. Since various flowers and patterns can be carved directly on the boards, they are used to make classical-style furniture.
②Plywood (plywood, thin core board): After steaming and boiling the logs to soften them, spin them into thin wood slices along the direction of the annual rings. After adding glue, use three or more odd-numbered veneers. , made of vertical and horizontal cross-gluing and hot pressing. Advantages: The surface is natural and beautiful, retaining the beautiful patterns of natural wood. Generally, there is no need to glue other veneer materials when using it. It only needs to be painted with paint to obtain an excellent appearance. It has good strength and toughness, has strong nail-holding power, is easy to process and insulate, and can make up for some naturally occurring defects of natural wood, such as small format, deformation, and large differences in vertical and horizontal mechanics. The furniture made is lighter than other artificial panels. Good bending resistance. Disadvantages: Therefore, it is rarely used as an overall material for furniture, and is generally used for the decorative parts of furniture. According to different thickness specifications, plywood is generally divided into six specifications: 3cm board, 5cm board, 9cm board, 12cm board, 15cm board and 18cm board. Plywood has the advantages of small deformation, large format, convenient construction, no warping, and good horizontal grain tensile properties. Therefore, this product is mainly used in various panels for furniture manufacturing, interior decoration, and residential construction, followed by shipbuilding, carriage manufacturing, various military industries, light industrial products, and packaging and other industrial sectors.
③Blockboard (large core board): There is a core made of natural wood strips in the middle, and very thin veneers are glued on both sides, so it is also called large core board and is the most important in decoration. one of the materials. The price of large core board is cheaper than that of thin core board, which is the plywood mentioned above. It has low density, small deformation, high strength and good dimensional stability, so it has a wide range of uses. The wood strips in the middle of the blockboard are generally made of poplar, Paulownia, fir, white pine, etc. High-quality products are flat and smooth, without degumming, sand damage, indentation, small thickness deviation, and no obvious hollow core after sawing. Advantages: solid, sound-absorbing, heat-insulating. In addition to the above mentioned, due to its simple processing technology and good nail-holding ability, it is very popular for on-site furniture making by decoration companies. Disadvantages: Affected by the processing technology, according to the direction of the core material, its vertical bending resistance is poor, but its horizontal bending resistance is better. In addition, the moisture content is high; the formaldehyde content is also high, and it needs to be treated before it can be used safely. Afraid of moisture, avoid using it in the kitchen and bathroom during construction. Many consumers choose large core boards based on weight and price. In fact, the heavier the large core board, the worse its quality. Because of its heavy weight, it indicates that this kind of board uses miscellaneous wood.
Judging from the current overall wardrobe industry, the commonly used boards are particleboard and density board (medium density board). Therefore, a detailed dissection of these two materials will be focused on.
④Density board (fiberboard): It is an artificial board made by processing wood or non-wood plants into fibers (cutting, soaking, pulping) and adding adhesives through high temperature and high pressure. As the name implies: the density is higher than ordinary boards. According to their different densities, they are divided into: high-density boards, medium-density boards, and low-density boards. Commonly used is medium density board. Advantages: excellent strength performance, uniform material, and no dehydration problem. The performance of MDF is close to that of natural wood, but without the defects of natural wood. The internal structure is not easy to warp, crack, and have small deformation, and is suitable for various mechanical processing. The surface is flat and smooth, the material is fine, the edges are firm, and it is easy to shape, avoiding problems such as decay and insect infestation. High bending strength and impact resistance. Density board can be carved and other special shapes. Disadvantages: Its disadvantages are as obvious as its advantages. It has poor moisture resistance and re-holding ability, and it is difficult to re-fix. From the perspective of moisture-proof performance, if a piece of medium density board is soaked in water, it will expand like bread. But when purchasing, pay attention to the fact that expansion too fast or too slow is not good. It is likely to be high-density board or low-density board (these two types of boards are rarely used now due to obvious defects).
The processing precision and process requirements are high, and the cost is high; because of its high density, it must be cut with a precision saw and is not suitable for processing at the decoration site. In foreign countries, density board is a good material for making furniture, but because our standards for density board are several times lower than international standards, density board is not suitable for us... >>
Question 2: What kind of boards should be used to make furniture? Knowledge and choice of boards
Classification of wood boards
1. According to material classification, it can be divided into two types: solid wood boards and artificial boards. Category. At present, except for the solid wood boards used for floors and door leaves, generally the boards we use are artificially processed artificial boards.
2. According to the molding classification, it can be divided into: solid board, plywood, fiber board, decorative panel, fireproof board and so on.
2. Variety of planks.
1. Solid wood board
As the name suggests, solid wood board is a board made of complete wood. These boards are durable and have natural texture, making them the best choice for decoration. However, due to the high cost and high construction technology requirements of this type of panels, they are not used much in decoration. Solid wood boards are generally classified according to the actual name of the board, and there is no unified standard specification.
2. Plywood
Plywood, also known as plywood, is commonly known as thin core board in the industry. It is made of three or more layers of one millimeter thick veneers or thin sheets glued together and hot pressed. It is currently the most commonly used material for hand-made furniture. Plywood is generally divided into six specifications: 3cm, 5cm, 9cm, 12cm, 15cm and 18cm (1cm is 1mm).
3. Decorative panels
Decorative panels, commonly known as panels. It is a decorative board with a single-sided decorative effect made by precisely slicing solid wood boards into thin veneers with a thickness of about 0.2mm, using plywood as the base material, and using an adhesive process. It is a special form of plywood with a thickness of 3 cm. Decorative panels are an advanced decoration material that is different from the current mixed oil method.
4. Blockboard
Blockboard is commonly known as large core board in the industry. Large core board is made of two pieces of veneer glued and spliced ??together. The price of large core boards is cheaper than that of thin core boards. Its vertical bending strength (divided by the direction of the core material) is poor, but its transverse bending strength is higher.
5. Particleboard
Particleboard is a thin board made of wood chips as the main raw material, then added with glue and additives and pressed. According to the pressing method, it can be divided into two categories: extruded particleboard and flat pressed particleboard. The main advantage of this type of board is that it is extremely cheap. Its shortcomings are also obvious: extremely poor strength. It is generally not suitable for making larger furniture or furniture with mechanical requirements.
6. Density board
Density board, also called fiberboard. It is an artificial board made of wood fiber or other plant fibers as raw materials and applied with urea-formaldehyde resin or other applicable adhesives. According to its density, it is divided into high density board, medium density board and low density board. Because density board is soft and impact-resistant, it is also easy to reprocess. In foreign countries, density board is a good material for making furniture. However, because the national standard for height boards is several times lower than the international standard, the quality of density boards in our country needs to be improved.
7. Fireproof board
Fireproof board is made of siliceous material or calcium material as the main raw material, and a certain proportion of fiber material, lightweight aggregate, adhesive and chemical additives Mixed, autoclaved decorative panels. It is a new type of material that is increasingly used at present, and its use is not only due to fire protection. The construction of fireproof boards requires relatively high glue, and the price of better quality fireproof boards is more expensive than decorative panels. The thickness of fireproof board is generally 0.8mm, 1mm and 1.2mm.
8. Melamine board
Melamine board, the full name is melamine impregnated adhesive film paper faced artificial board. It is a decorative board made by soaking paper with different colors or textures in melamine resin adhesive, drying it to a certain degree of solidification, paving it on the surface of particleboard, medium density fiberboard or hardboard, and hot pressing it.
Melamine board is a kind of wall decoration material. At present, some people use melamine boards to fake composite floors for floor decoration, which is inappropriate.
Selection of boards
First look at whether it is environmentally friendly or not
According to the "Formaldehyde in Interior Decoration Materials Artificial Panels and Their Products" which was implemented on January 1 this year According to the requirements of "Release ***", the formaldehyde release amount of building materials used directly indoors must be less than or equal to 1.5 mg per liter. If the formaldehyde release amount is less than or equal to 5 mg per liter, it must be finished before it can be used. Indoors, formaldehyde emission exceeding 5 mg per liter is considered substandard. Bringing unqualified wood home is like adding vitality to a new home. When buying building materials, you must first check whether it is environmentally friendly.
1. Blockboard "Big Core Board": It has good moisture-proof effect and cannot be directly painted
The middle of the blockboard is a core made of natural wood strips. A very thin wood veneer is glued on both sides. As the name suggests, large core board is one of the most important materials in decoration. It can be used to make furniture and wooden doors and door frames, heating covers, curtain boxes, etc. Its waterproof and moisture-proof performance is better than particleboard and medium density board. When selecting, look at the internal wood. It should not be too broken. The gaps between the wood should be 3...>>
Question 3: What is the best material for making a wardrobe? Solid wood particle board Not easily deformed, the surface is flat, strong in pressure resistance, rational and stable, low in cost and high in environmental protection
High-density boards have the same environmental protection level, higher than solid wood particle boards
High-end double-sided wood boards are the most expensive.
Question 4: What boards are generally used in custom-made furniture? Custom-made furniture has become a very popular way to purchase furniture in today's society. Custom-made furniture breaks the limitations of space. What boards are used in custom furniture? Let’s find out together!
1. Particleboard
An artificial board made by drying, mixing with rubber, hardener, waterproofing agent, etc., and pressing under a certain temperature and pressure. It is similar to honeycomb, so it is called particle board. Particleboard is also one of the customized furniture panels. The interior is granular with a cross-stacked structure. The performance in each direction is basically the same, and the structure is relatively uniform, so it has good nail-holding power and good lateral load-bearing capacity.
2. Fiber board
Fiber board is made of plant fiber as the main raw material, and is made through hot grinding, sizing, paving, hot pressing and other processes. The surface of the fiberboard is smooth and the material is fine, making it easy to shape and mill. Fiberboard has good toughness and is not easy to break when the thickness is small (such as 6MM, 3MM), so it is a good raw material for this kind of customized furniture panels. You can consider it when purchasing customized furniture panels.
3. Particle board
Solid wood particle board is also very good among customized furniture boards. In fact, it is a board produced with particle board technology. It is a kind of particle board and belongs to the homogeneous particle board. Solid wood particle board is an artificial board made of scraps of wood or other lignocellulosic materials, which are glued together under the action of heat and pressure after applying adhesive. The variety of customized furniture panels allows everyone to choose freely when customizing.
There are many types of panels for customized furniture, I believe everyone knows about it! Friends who plan to buy furniture may wish to learn more about these boards!
Question 5: What kind of board is better for the overall wardrobe? There are currently three types of overall wardrobe boards used: 1. MDF, 2. Plywood, and 3. Hexiang board.
MDF is a type of density board, which also includes long fiberboard and short fiberboard. It is an artificial board made from wood fiber or other plant fibers as raw materials, which are broken, separated and dried, then urea-formaldehyde resin or other suitable adhesives are applied, and then hot pressed. Its density is generally in the range of 0.5-0.8 g/cm3, and its thickness is generally 3-30 mm.
Plywood, also known as plywood, is commonly known as thin core board in the industry. It is made of three or more layers of one millimeter thick veneers or thin sheets glued together and hot pressed. It is currently the most commonly used material for hand-made furniture. Plywood is much better than MDF in terms of moisture resistance.
Hexiang board is a new type of ecological and environmentally friendly artificial board. It uses rice, wheat and other crop straw from nature as the main raw material, and uses polyurethane ecological glue that does not contain formaldehyde as the adhesive. It adopts national Developed with advanced patented technology.
"Zero Realm Hexiang Board" - China's first artificial board that does not release formaldehyde! It combines the advantages of wood particle board and medium density fiberboard and can be widely used in interior decoration, furniture manufacturing, flooring, kitchen cabinets, sound-absorbing panels, and writing Boards, drawing boards and packaging materials are ideal substitutes for wooden artificial boards. Hexiang board is a truly environmentally friendly board. It is recommended to use this board when making wardrobes, which is of great benefit to your family.
If you want to know more specifically, you should search for Aolong Weigao on Baidu. This brand is quite good at applying these three types of boards. I suggest you go and find out more.
Question Six: What kind of boards are used for furniture? The number one environmentally friendly board. Composite solid wood, moisture-proof board, and solid wood paint-free board are both moisture-proof, environmentally friendly, and cost-effective. Cabinet products across the country have experienced more than ten years of development, and more than ten years of experience are enough. The moisture-proof board for wardrobes is the best choice! The moisture-proof board for cabinets can be used in severely humid environments, which shows its high quality. Because the board surface is more brittle, the requirements for the production equipment are higher. When painting, the wall will contain a small amount of moisture. After the overall wardrobe is installed, it cannot be ventilated. The backboard of the wardrobe needs a board with better moisture resistance. The moisture-proof board is soaked in water. Because of the long wood fibers and the addition of green moisture-proof agent, It will no longer expand after being soaked to a certain extent, so it makes sense that most brands of cabinets use moisture-proof board as the main material of the cabinet. More environmentally friendly, the truth is simple: molding wood does not require glue, and it is definitely environmentally friendly. If the amount of glue used is different when cut into 1 piece and 5 pieces, the less glue, the more environmentally friendly. MDF is also called density board. Wood powder is pressed into shape, which has better flatness and is more suitable for engraving, milling and molding. It is usually used for modeling door panels, such as baking paint and molding (blister). MDF is also made of softer material, which is less likely to cause edge explosion during edge sealing and is easier to use. Processing, so many small factories use medium density. In terms of moisture resistance, particle board is much worse than moisture-proof board. Without the green core moisture-proof agent, if it is in a humid environment for a long time, the raw material of MDF is easy to mold and corrode. Wood powder, if the medium density board is soaked in water, it will expand like a cake. Third place/small factory produces particleboard at a low cost. Most small manufacturers consider the cost and generally use particleboard (i.e. solid wood particle board) and ordinary glue, the cost is The lowest among the three materials. Fourth place/ecological board (referring to the ecological board produced by small workshops) large core board or sandwich board with double-sided melamine surface: sandwich board (commonly known as blockboard and woodworking board) It is a plywood with a solid wood core. It cuts logs into strips, splices them into cores, and processes the outer veneer. The force of the entire board comes from the two thin outer veneers, and the middle is made of spliced ??wood blocks. The base material is basically unstressed and is easily broken and deformed. Most of this kind of board is made of fir that is one or two years old. The wood block can be broken by just using your fingers, and the nail-holding strength is several times lower than the national standard.
Question 7: Which furniture board is better and how to choose the type? The choice of furniture board mainly depends on whether it is suitable for your own use and your own budget. You can refer to the following points when choosing a type:
1. Distinguish different boards
Density boards, solid wood particle boards, and solid wood multi-layer boards are commonly used in the custom furniture market. To judge and distinguish the classification of customized furniture panels, the most intuitive way is to look at the cross-section of the sample.
From the cross-section, density board is made of powdered wood fibers pressed under high temperature and high pressure. The combination is relatively tight and the surface is smooth, but it is heavier. Powdered fibers are more likely to absorb moisture than other fibers. Therefore, the moisture resistance is not as good as other boards, and the edge sealing is in place without affecting the use.
Solid wood particle board is made of wooden granular structure pressed under high temperature and high pressure, hence the name. Solid wood particle board is not as tightly bonded as density board, so it is lighter in weight. Some of the poor quality boards may even have small pores. Solid wood particle board has the advantages of being resistant to deformation and having strong nail-holding ability. It is currently one of the most commonly used main materials for panel furniture in the industry.
Solid wood multi-layer boards are made of three or more layers of veneers or thin plates under high temperature and high pressure. Solid wood multi-layer boards have the advantages of small deformation, high strength, good intrinsic quality, and good flatness.
2.
Look for environmentally friendly boards
Whether a board is environmentally friendly mainly depends on its formaldehyde release content. We mainly use E2 and E1 levels as environmental protection standards. standard.
Many merchants say that their boards are E0 grade or even super E0 grade boards when promoting. Currently, such standards have not been introduced in China, so everyone needs to screen them when inspecting. E2 grade boards have a formaldehyde emission of less than 5 mg/L and are generally limited to outdoor use. Indoor use must be treated as closed. E1 grade boards have a formaldehyde emission of less than 1.5 mg/L and can be used directly for indoor use. Nowadays, some businesses promote themselves as "zero formaldehyde" and "formaldehyde-free" boards. As long as they are man-made boards, they will basically contain formaldehyde. The most direct way to judge whether the formaldehyde content of the board exceeds the standard is to open the wardrobe door or open the drawer. If there is a strong sexual smell, or it smokes the eyes and makes people cry, it basically means that the formaldehyde content exceeds the standard, so it is best when customizing furniture. It is necessary to go to a formal and well-known integrated wardrobe brand merchant to make a reservation, and at the same time require the merchant to produce a material test report.
3.
Look at the panel veneers
The panels currently used for the production of panel furniture use green and environmentally friendly melamine veneers that have been pressed under high temperature and high pressure. Panel, the decorative panel of this material has high surface strength, wear resistance, scratch resistance and high temperature resistance. However, there are also some small manufacturers that sell substandard products. Although the surface is smooth and beautiful, and feels good to people, obvious scratches will appear if you lightly scratch it with a key or a fingernail. This kind of decorative panel not only has poor wear resistance. , and it is not fireproof.
4. Look at the edge sealing of the board
The craftsmanship of the entire manufacturer can also be seen from the small details of the edge sealing of the board. Professional custom furniture manufacturers use boards cut by fully automatic CNC precision cutting saws, and there is no chipping around the boards. Then use a fully automatic edge banding machine to seal the edges. Good edge sealing is generally of the same color, with flat, smooth and rounded edges, tight seams, obvious edges, and delicate corners. However, many small manufacturers use manual edge sealing due to limited equipment. The edge sealing strips are easy to fall off and the edges are rough. It is easy for the board to deform due to moisture expansion. When purchasing, we should also pay attention to whether it is edge-sealed on all sides. Only edge-sealing on all sides can effectively prevent moisture in the air from invading the interior of the board and formaldehyde release.
Question 8: What is the best board to use for making a wardrobe? Friends who have bought a wardrobe will more or less hear the shopping guide introduce the wardrobe boards. I am afraid that not many can really identify them. When they are finally installed at home, they still don’t know. It doesn’t matter what board you use, Kafeiya Custom Wardrobe will answer your questions.
At present, there are seven main types of boards that are commonly used in the custom wardrobe industry, namely density board also called medium fiber board, solid wood particle board, solid wood multi-layer board, block board, fir board, and ecological paint-free board. board, fireproof board. Let me introduce them one by one to you below.
Density board (medium fiber board):
It is made of powdered wood fiber and pressed at high temperature, with good surface smoothness. Because of its soft texture, impact resistance, high strength, uniform density after pressing, and easy reprocessing, it is suitable for making blister boards, baking paint boards, etc. But the disadvantage is that the waterproofing is poor and it is easy to swell and deform. When purchasing density boards, density boards are mainly tested for formaldehyde release and structural strength. Density boards are divided into E1 and E2 levels based on formaldehyde release. If the formaldehyde release exceeds 30mg/100g, the board will fail.
Solid wood particle board:
A new, high-end and environmentally friendly base material, which is produced using particle board technology. The density of solid wood particle board is relatively high, and the wood fiber particles in the board are large, which preserves the essence of natural wood. The content of solid wood particle board in the use of adhesive is generally less than 5%, and it is environmentally friendly. In addition, its processing performance is as good as particleboard. Particle board is heat-insulating and sound-absorbing. Due to its easy preparation method, the quality varies greatly and is difficult to identify. It has poor bending resistance and tensile resistance, and its density is loose and easy to loosen.
Solid wood multi-layer board:
It is made of three or more layers of solid wood veneers or thin sheets of about one millimeter, which are hot-pressed. Commonly used are three-plywood, five-plywood, and nine-plywood. Plywood and twelve-plywood (commonly known as plywood, five-centimeter board, nine-centimeter board, twelve-centimeter board). Board cores include: poplar, miscellaneous wood, and amine wood multi-layer boards; they have good structural strength and stability. Plywood contains a large amount of glue, so edge sealing must be done during construction to reduce pollution during the day. When purchasing solid wood multi-layer boards: Choosing multi-layer boards mainly depends on the amount of formaldehyde released and the bonding strength. If the glue strength of the plywood is not good, it will easily fall apart. When selecting, pay attention to whether the nominal thickness of the plywood matches the actual thickness.
Blockboard:
A large core board with a solid wood core. It has good screw-holding power and high strength. It has the characteristics of hardness, sound absorption, heat insulation, etc., and its moisture content is not high. , between 10% and 13%; when purchasing blockboards: the surface of the blockboards should be smooth, without warping, deformation, blistering, or dents; the core strips should be evenly arranged, with small gaps, and the core strips should not be decayed or broken. , wormholes, knots, etc.
Fir board:
Laminated wood is an emerging solid wood material. It uses large-diameter logs and is deeply processed to form boards that are interlaced and spliced ??like fingers. Integrated wood can be directly colored and painted, which saves one process compared to blockboard.
Ecological paint-free board:
Melamine Malacca ecological paint-free board, or melamine full-square fir ecological paint-free board, is an all-solid wood ecological paint-free board with good stability and resistance to deformation. It has strong ability, strong nail holding power, and the most important environmental protection level is very high, reaching the European E0 standard, and the formaldehyde emission is less than 0.5.
Fireproof board:
Use siliceous material or calcium material as the main raw material, mixed with a certain proportion of fiber materials, lightweight aggregates, adhesives and chemical additives, and steamed The thickness of decorative boards made by pressing technology is generally 0.6-1.2mm; fire-proof boards are economical, high-strength, fire-resistant and moisture-proof.
Through Kaphia’s detailed explanation of customized wardrobes, I believe you will have a clear understanding of the classification of wardrobe panels. Finally, Kaphia wants to tell you that each customized wardrobe panel has its own advantages and disadvantages. The key is to choose one that suits you. Only when you understand the performance of each board can you customize a wardrobe that suits your needs.
Question 9: Is it good to customize furniture during decoration? What materials are generally used for boards? It is recommended not to make too many fixed furniture during decoration, which will make the space less flexible.
Moreover, because the varieties and styles of furniture in the market are becoming more and more new every day, the newly made furniture may not be what you want. But in the market The choice must be based on what you like. However, things like wardrobes can be made fixed because they usually exist in one corner of the room and do not affect the flexibility of the overall space.
Plates are generally If it is an integrated board, you must pay attention to the environmental protection level of the board. There is a price difference between E0 and E1
Question 10: What board to use for the wardrobe 1. Fir integrated board
Board introduction: Fir board and It is called finger-jointed board. It is spliced ??into small sections, and glue is used in all joints; secondly, the wood of this kind of board is soft, not strong enough, and is easy to deform and crack; thirdly, its surface If it is uneven, it is easy to scratch the clothes, and the solution to the scratch is to polish and paint, which will cause a high cost, smell, and is not environmentally friendly, and the paint will easily change color, crack, and fall off. Fourth, it is easy to get insects and difficult to take care of.
Advantages: Affordable, more environmentally friendly when not polished and painted, with the fragrance of fir itself.
Disadvantages: The surface is rough and easy to scratch clothes; because it is easy to deform and crack, it can only be fixed to the wall during processing and cannot move; the surface of the board has many knots and small holes, which is not beautiful; it must be processed It can be put into use after multiple processes (hole filling, sanding, waxing or painting) and until the smell is gone.
2. Pure solid wood, imitation solid wood, solid wood veneer
Board introduction: The base material used in solid wood furniture is natural wood, and the real patterns of the wood can generally be seen on the surface. Pure solid wood furniture means that all materials used in the furniture are solid wood, including tabletops, wardrobe door panels, side panels, etc., which are all made of pure solid wood and do not use any other form of artificial panels. Pure solid wood furniture has very high requirements for craftsmanship and materials. The requirements for material selection, drying, finger jointing, and seaming of solid wood are very strict. If any process is not strictly controlled, cracking and loosening of joints will occur in small cases. The entire set of furniture was deformed and rendered unusable. Imitation solid wood furniture looks like solid wood furniture from the outside. The natural texture, feel and color of the wood are exactly the same as solid wood furniture. But in fact, it is a mixture of solid wood and artificial panels, that is, side panels, tops, bottoms, shelves and other components. Thin wood veneer in particleboard or MDF fibreboard, doors and drawers in solid wood. This process saves wood and reduces costs. So the price is more acceptable. Furniture manufacturers sometimes apply varnish or matte paint to solid wood furniture to express the natural color of the wood. Solid wood veneer generally refers to solid wood veneer, with solid wood veneer on the surface and density board on the inside.
The performance is more stable than pure solid wood and less likely to crack, but it is not as environmentally friendly as pure solid wood.
1/7
Advantages: The grand, noble and original temperament caters to people's psychology of returning to nature.
Disadvantages: The price is higher and difficult to take care of; due to the painting process, it is easy to change color, which is why the color of solid wood furniture will become darker with use. The fatal flaw of solid wood furniture, the most important one is that changes in moisture content make it easy to deform, and it needs special care. For example, it cannot be exposed to sunlight, it cannot be too cold or extremely hot, and it is not suitable for solid wood furniture in an environment that is too dry or humid. of. If you do not pay attention during use and frequently turn on and off the air conditioner, resulting in excessive changes in temperature and humidity, even qualified solid wood furniture products may sometimes deform and crack.
3. Melamine board
Board introduction: Melamine board, the full name is melamine impregnated film paper faced artificial board. It is made by soaking paper with different colors or textures in melamine resin adhesive, drying it to a certain degree of solidification, paving it on the surface of particle board, medium density fiberboard or hard fiberboard, and hot pressing it. Decorative panels. At present, the base materials used in panel furniture on the market are all this type of boards. The base materials are divided into melamine particle board and melamine density board. The appearance design of melamine board has more changes and is more personalized. It is the material of choice for top European furniture manufacturers. However, the environmental protection requirements for the board are very strict and must meet the European E1 level standard.
Advantages: Affordable; no deformation, cracking, or fading; rich colors; very convenient to assemble and disassemble, and panel furniture with high processing precision can be disassembled and installed multiple times; environmentally friendly and fashionable.
Disadvantages: also in terms of environmental protection. Furniture produced from artificial boards with excessive formaldehyde content will cause indoor environmental pollution. Consumers should pay attention when purchasing. They can open the cabinet door or drawer and smell it. If there is a strong odor, it is likely that formaldehyde exceeds the standard and should not be purchased. ｜Decoration
4. Woodworking board
Woodworking board is the blockboard on the market. It is made of natural rotary cut veneers and solid wood panels, glued and hot pressed. Plate. According to the quality of the material and the texture of the surface material, it can be divided into "excellent products", "first-class products" and "qualified products". The inner core materials also include poplar, birch, pine, paulownia, etc. The surface material can be one or two layers of veneer on both sides of the board core, and can be classified into three-layer blockboards and five-layer blockboards. During the production process of blockboards, there will be problems such as excessive formaldehyde release, unqualified transverse static bending strength, unqualified product moisture content, and low bonding strength. Adding a layer of wood-grained three-centimeter board to the block board and then painting it is a common practice in carpentry furniture nowadays.
Advantages: Affordable price...>>