2. Just select the hard disk startup item.
When the general motherboard leaves the factory, the default hard disk is the first startup item.
The specific steps to change the hard disk mode in bios are as follows:
1. First, turn on the computer. When the startup screen appears, press the "DEL" key on the keyboard to enter the bios setup.
2. After entering, use the keyboard direction keys to move to "Advanced", find the SATA configuration, and press enter to enter.
3. At this time, the relevant information of hard disk mode option setting will pop up. Use the arrow keys to Enter SATA mode, and then press Enter to confirm.
4. There are two hard disk modes to choose from: IDE and AHCI. IDE mode is suitable for classic old systems such as windows xp and windows 2003, and AHCI mode is suitable for new series systems such as windows 7, windows8 and windows vista. Select the desired settings, save and exit.
Method of setting USB flash drive as startup item in bios:
1. Press the power button and wait for the computer to start. Press the "esc" key to enter the bios setup interface, switch to the boot interface, and find the BBS priority of the hard disk, as shown in the following figure:
2. In the pop-up interface, move the cursor to select the first startup item, namely "startup option # 1", and then select "Adata disk 1 100" (namely your U disk) in the pop-up window, as shown in the following figure:
3. Then you can see that the USB flash drive is set as the first startup item successfully. Press F 10 to save and exit and restart automatically, as shown in the following figure:
Colorful c.n 61g (NVIDIA nforce 430 (MCP 61) supports USB flash drive installation system.
Generally, the problem of removing disks or other media occurs, which is probably caused by the following reasons: 1, jumper problem of computer hard disk or optical drive, check whether the jumper of hard disk and optical drive is correct.
2. For the problem of setting the system BIOS startup items, it is necessary to check whether the BIOS startup items are set correctly.
3. Check whether the computer is equipped with a floppy drive. You need to close the floppy drive port in the BIOS.
Usually, 80% of this error is due to jumper problems, so we can unplug the IDE cable from the hard disk, leave the main hard disk in the string, and then reconnect the IDE cable.
If the bios setting of the extended data fails, it is recommended to consult the computer salesperson. If you can't enter the bios after pressing the shortcut key, you can try it several times. Generally, the computer boot interface has bios shortcuts, so you can pay attention to the screen prompts.
BIOS is the abbreviation of "Basic Input Output System" in English, and its Chinese name is "basic input output system" after literal translation. It is an industry standard firmware interface on IBM PC compatible systems. The word BIOS first appeared in CP/M operating system in 1975. BIOS is the first software loaded when a personal computer is started.
In fact, it is a set of programs solidified on a ROM chip on the computer motherboard, which stores the most important basic input and output programs, self-checking programs after starting up and self-starting programs of the system. It can read and write the specific information of system settings from CMOS. Its main function is to provide the lowest and most direct hardware setting and control for the computer.
In addition, the BIOS also provides some system parameters to the operating system. The change of system hardware is hidden by BIOS, and the program uses BIOS function instead of directly controlling the hardware. Modern operating system ignores the abstraction layer provided by BIOS and directly controls hardware components.
Nowadays, this system has become the target of some virus Trojans. Once this system is destroyed, the consequences are unimaginable.
How to set the bios as the first boot item on the colorful motherboard -: 1. Press dele key to enter the motherboard BIOS. 2. Find the boot project boot3. Then find the hard disk to be set in sata project and set it as the first boot item.
How to set the first startup item of colorful motherboard-hard disk startup: enter bios setup according to the prompt, then find the options related to startup sequence, and select your hard disk first. You can refer to your motherboard manual. It's unclear here. In addition, if you know some English, you should be groping.
How to set the USB flash drive as the first boot for colorful intelligent motherboards? -: 1. The computer needs to be replaced with a USB flash drive to start the system. At the beginning, press the del key of the keyboard to enter the bios setup. Different computers may have different ways to enter the BIOS. Some press the keyboard F2 or F 10.2 to enter the BIOS, then select the boot item, and then select the hard disk. Then set the USB flash drive as the first drive. 3. Then select the boot device priority. Then press F 10 of the keyboard to save the settings. The USB flash drive has been set for the first boot!
Colorful intelligent motherboard, how to set the computer hard disk as the first startup disk! -:Set the hard disk startup disk as the first startup disk of colorful intelligent motherboard. The steps are as follows: 1. Start the computer and press DEL at the same time (some computers press F2). 2. Press the left and right keys, the cursor will move to "Advanced BIOS Device", and press Enter 3. Press the up and down keys, the cursor will move to "First Boot Device" and press Enter 4. Select hard disk 5 in the pop-up menu.
Colorful motherboard, how to set the first startup item as USB device startup? -:Boot into the BIOS interface, and you can set the first startup item. Press del or F2 to enter the BIOS interface when booting.
How to set the startup sequence of colorful motherboards-:Press the delete key to enter the motherboard bios, and find the boot startup item to set the startup sequence.
How to set the USB flash drive of colorful motherboard -: 1, press F 1 12 to enter the USB flash drive selection startup interface, and select "USB flash drive startup disk" as the cursor.
How do colorful motherboards enter bios settings? Boot prompt is shown in the figure-:Most motherboards can enter the BIOS by pressing the "del" key continuously when booting, and some notebooks can only enter by pressing the f2 key! Bios is the basic input and output system of computer motherboard, and it is also the basic system for communication and identification between computer hardware, including: power supply setting, hardware on/off, hardware working mode setting, overclocking and so on. The contents in bios are generally in English, and now some brands of new motherboards support Chinese; Without knowing its specific function, the options inside can't be set at will, lest the computer can't boot normally!
Colorful 780G motherboard 1 How to set LAN as the first startup item? -: 1. Insert the startup U disk made by using the U disk installation system tool into the usb socket of the notebook, and then start or restart the computer. When you see the startup screen, please press the "F 1 1" key continuously. 2. When you press the "F 1 1" key continuously, it will appear. There are three options for selecting startup items: ① hard disk startup items; ② usb startup item; (Because U-depth Edge Shaw uses Kingston USB flash drive, Kingston USB flash drive is displayed) ③ CD-ROM drive startup item; 3. When we move the cursor to the second option "King's Stondt 10 1g2pmap" and press Enter, the computer will start from the USB flash drive and enter the depth main menu reference tutorial: /2rXLeD.
Colorful how to set usb as the first boot item-:enter the BIOS interface to set the first boot item when booting. Press del to enter the BIOS interface to set USB startup when booting, or press F 1 1 to directly enter and select USB startup items.