Precautions for chassis and tire hub. The chassis and tire hub of a car determine the height and speed of the car. What are the precautions for the normal use of chassis and tire hub? Let's share the precautions for the chassis and tire hub. Let's find out.
Precautions for chassis and tire hub 1 1. Chassis data changes due to human factors. No matter what car I drive, under any circumstances, I will not easily get on the highway platform, even if it is a pure off-road vehicle. It's hard to change my habits. In fact, getting on the highway platform is very easy and not difficult for any car. Why can't I get on? Because in real life, you can always find solutions that are not available on the platform, that's all. The danger of getting on the platform often won't appear in the near future, but it will be obvious for a long time, such as site data change, deviation, high-speed jitter, eating tires and so on. No matter how you do four-wheel alignment, dynamic balance can't be changed. Why bother? And it is harmful to shock absorption and tires, and it is not good. Don't say you're an SUV chassis. You're no different from a car chassis, but you're a little high. Don't say that you are purely off-road, just better than the car chassis. Save the sturdy chassis for when you really need it. Why compete with the roadshow platform? It is not good to lie on the counter when parking, so it is also an important factor to minimize traffic accidents.
2, chassis rust chassis rust new car manufacturers have done, according to my experience, the normal use of 10- 15 chassis is no problem `, chassis rust, not afraid of rust from the outside to the inside, most afraid of rust from the inside out, many cars, when it is found that rust, it is very important that there is no water inside the body, so I will not go into details.
3. tires and wheels when I park on the side of the road, I never lean directly to the side even if there is no car in front of me or behind me. Every time I park away from the road platform, I will back up against the road platform. It's not that I'm not good at it, because I can't see the tires and kerbs when I go forward, but I can see them intuitively by feeling, so no matter how long I drive, my wheels will not be bruised, just like new ones. Ha, you can observe it. There are too many cars, and the wheels have been injured, which affects the appearance. Secondly, the sidewall is the weakest part of the tire, and the damage that is often scratched is invisible at that time. You don't want to have a flat tire on the highway in the future.
4, tire repair According to the regulations, dynamic balance should be done after each tire repair and tire removal, but the workers are troublesome and no one helps you. Therefore, it is necessary for the workers to mark the tire and mark the valve, and you should worry about whether it is in place after installation. Never, don't care, don't worry, the workers don't care, and drive away at high speed.
Precautions for Chassis and Tire Hub 2 Precautions for Daily Maintenance of Hub:
1. When the temperature of the hub is high, let it cool naturally before cleaning. Never wash with cold water. Otherwise, the aluminum alloy wheel hub will be damaged and even the brake disc will be deformed, which will affect the braking effect. In addition, cleaning the hub with cleaning agent at high temperature will make the surface of the hub react chemically, lose luster and affect the appearance.
Aluminum platform gold
2. When the wheel hub is stained with asphalt that is difficult to remove, if the general cleaning agent is useless, try to remove it with a brush, but don't use a hard brush, especially an iron brush, so as not to damage the wheel hub surface.