A, construction engineering quality inspection comprehensive institutions:
1. Comprehensive technical resources
(1) The construction unit is an independent legal person or authorized by law, and can bear legal responsibilities, with a capital of not less than 20 million yuan;
(two) through the provincial measurement certification, and approved by the administrative department of construction in the State Council;
(3) The full-time person-in-charge of the construction enterprise should have a senior technical title, be familiar with the inspection business, and have more than 10 years experience in inspection or project management. The technical person in charge should have the senior technical title of the main specialty and have more than 5 years of inspection management experience. The number of personnel shall not be less than 100, and the number of technical personnel shall not be less than 70% of the total number of personnel, of which: 40% are with intermediate or above technical titles, 20% are with senior or above technical titles, and there are not less than 3 registered practitioners who meet the professional requirements: first-class registered structural engineers; At least 2 NDT level III personnel; At least 2 registered geotechnical engineers, and registered equipment engineers 1 person.
In principle, the inspectors of the construction unit shall not exceed 65 years old, and the number of inspectors over 60 years old shall not exceed 1/3 of the number of professional inspectors. (Refer to and modify the Administrative Measures for the Examination of Construction Drawings and Design Documents of Housing Construction and Municipal Infrastructure Projects)
(4) Environment and equipment: The construction enterprise has an independent laboratory that meets the inspection conditions, with an area of not less than 5,000 square meters. Inspection equipment must meet the requirements of inspection business, and the subcontracting items shall not exceed 2%;
(5) The information system of the construction unit is perfect.
2. Detection technology ability
Should have the ability to undertake the detection and evaluation of engineering materials, building structure (including steel structure), foundation, building curtain wall doors and windows, building energy conservation, indoor air environment, ventilation and air conditioning, building intelligence and municipal road and bridge engineering acceptance.
Comprehensive Grade A units should obtain at least 6 Grade A professional testing qualifications for building materials, main structure, foundation, curtain wall doors and windows, building energy conservation, ventilation and air conditioning, and other majors have 1 Grade A professional testing qualification or 2 Grade B professional testing qualifications.
3. Work performance:
(1) Engaged in testing work 10 years or more (inclusive), with no record of bad violation of laws and regulations; (2) To preside over the compilation of industry/local scientific research projects or industry/local technical standards.
Second, the construction engineering quality inspection class B comprehensive institutions:
1. Comprehensive technical resources
(1) The construction unit is an independent legal person or authorized by law, and can bear legal responsibilities, with a capital of not less than100000 yuan;
(2) passed the metrological certification at or above the provincial level and was approved by the provincial construction administrative department;
(3) The full-time person-in-charge of the construction enterprise shall have a senior technical title, be familiar with the testing business and have more than 8 years experience in testing or project management. The technical person in charge should have the senior technical title of the main specialty and have more than 5 years experience in inspection or project management. There shall be no less than 80 staff members and no less than 60% technicians, including: no less than 30% with intermediate technical titles, no less than 12% with senior technical titles, and no less than 1 person with registered practitioners meeting professional requirements: first-class registered structural engineers; The first-class registered geotechnical engineer shall be no less than 1 person and the first-class registered equipment engineer shall be no less than 1 person.
In principle, the inspectors of construction enterprises shall not exceed 65 years old, and the number of inspectors over 60 years old shall not exceed 1/3 of the number specified by professional inspectors. (Refer to and modify the Administrative Measures for the Examination of Construction Drawings and Design Documents of Housing Construction and Municipal Infrastructure Projects)
(4) Environment and equipment: there is an independent laboratory that meets the inspection conditions, with an area of not less than 3,000 square meters. Inspection equipment must meet the requirements of inspection business, and the subcontracted items shall not exceed 5%;
(5) The information system is established.
2. Detection technology ability
The construction unit shall have the ability to undertake the inspection of all the projects required for the acceptance of engineering materials, building structures (including steel structures), foundations, building curtain walls, doors and windows, building energy conservation, indoor air environment, ventilation and air conditioning, building intelligence, municipal roads and bridges, etc.
Comprehensive B-level units must obtain at least 6 professional B-level testing qualifications for building materials, main structure, foundation, curtain wall doors and windows, building energy conservation, ventilation and air conditioning, and other professional 1 professional B-level testing qualifications.
3. Work performance:
(1) The construction unit has been engaged in testing for more than 8 years (inclusive) and has no record of bad laws and regulations;
(2) Participate in the preparation of industrial scientific research projects or industrial technical standards.
Three, the construction engineering quality inspection professional institutions:
1. Comprehensive technical resources
(1) The construction unit has an independent legal person with a capital of not less than RMB 4 million;
(2) passed the metrological certification at or above the provincial level and was approved by the provincial construction administrative department;
(3) The full-time person-in-charge of the construction enterprise shall have a senior technical title, be familiar with the testing business, and have more than 10 years working experience in testing or project management. The technical person in charge should have the senior technical title of this major and have more than 5 years of inspection management experience. There shall be no less than 30 staff members and no less than 60% technicians, of which 30% are technical titles above intermediate level and 65,438+05% are technical titles above senior level. There should be registered employees who meet the professional requirements: in principle, testing personnel should not exceed 65 years old, and testing personnel over 60 years old should not exceed 1. (Refer to and modify the Administrative Measures for the Examination of Construction Drawings and Design Documents of Housing Construction and Municipal Infrastructure Projects)
The construction unit shall have at least three first-class registered structural engineers, and at least two third-class NDT personnel shall have Grade A qualification requirements for the main structure and steel structure; The professional qualification of foundation requires at least two first-class registered geotechnical engineers; Professional qualification requirements for ventilation and air conditioning 1 Class I registered equipment engineer.
The first-class qualification of the main structure of a construction enterprise must also have the first-class qualification of building materials.
(4) Environment and equipment: there is an independent laboratory meeting the requirements of the professional inspection work, and the laboratory area is not less than 500 square meters. Inspection equipment must meet the requirements of inspection business, and there can be no subcontracted items; (See attached table)
(5) Professional testing institutions for building structures (including steel structures) must have testing technical resources related to engineering materials.
2. Detection technology ability
Should have the ability to undertake the detection and evaluation of all the projects required for the professional acceptance. (See attached table)
3. Work performance:
(1) Engaged in testing work 10 years or more (inclusive), with no record of bad violation of laws and regulations;
(2) Participate in the preparation of industry/local technical standards.
Four, construction engineering quality inspection B professional institutions:
1. Comprehensive technical resources
(1) The construction unit has an independent legal person with a capital of not less than RMB 2 million;
(2) passed the metrological certification at or above the provincial level and was approved by the provincial construction administrative department;
(three) the full-time person in charge of the construction enterprise shall have intermediate technical titles, be familiar with the testing business, and have more than 5 years of experience in testing or project management. The technical person in charge should have the senior technical title of this major and have more than 5 years of inspection management experience. There shall be no less than 20 staff members and no less than 50% technical staff members, among whom, no less than 25% have intermediate or above technical titles and no less than 12% have senior or above technical titles. In principle, the number of inspectors over the age of 60 shall not exceed 65+0/3 of the number of inspectors in this profession. (Refer to and modify the Administrative Measures for the Examination of Construction Drawings and Design Documents of Housing Construction and Municipal Infrastructure Projects)
The professional qualification of the main structure and steel structure of the construction unit requires no less than 1 person for registered structural engineers and no less than 1 person for NDT level III personnel; The professional qualification requirements of foundation are not less than 1 first-class registered geotechnical engineer.
Grade B qualification of main structure specialty must also have Grade B and above qualification of building materials specialty.
(4) Environment and equipment: The construction enterprise has an independent laboratory that meets the requirements of professional inspection, and the laboratory area is not less than 300 square meters. Inspection equipment must meet the requirements of inspection business, and there shall be no subcontracted items; (See attached table)
(5) Professional testing institutions for building structures (including steel structures) must have testing technical resources related to engineering materials.
2. Detection technology ability
Should have the ability to undertake the inspection of related projects required for the acceptance of this major. (See attached table)
3. Work performance:
(1) The construction unit has been engaged in testing for more than 5 years (inclusive) and has no record of bad laws and regulations; (2) There are not less than 40 engineering inspection items or not less than 3000 material inspection items every year.
Five, construction engineering quality inspection level C professional institutions
1. Comprehensive technical resources
(1) The construction unit is an independent legal person with a capital of not less than 1 10,000 yuan;
(2) passed the metrological certification at or above the provincial level and was approved by the provincial construction administrative department;
(three) the full-time person in charge of the construction enterprise shall have intermediate technical titles, be familiar with the inspection business, and have more than 2 years experience in inspection or project management. The technical person in charge should have the intermediate technical title of this major and have more than 3 years experience in inspection or project management. The number of personnel shall not be less than 15, and the technical personnel shall not be less than 50% of all personnel, among which, the personnel with intermediate or above technical titles shall not be less than 20%, and the personnel with senior or above technical titles shall not be less than 65+02%. In principle, the number of inspectors over the age of 60 shall not exceed 65+0/3 of the number of inspectors specified in this major. (Refer to and modify the Administrative Measures for the Examination of Construction Drawings and Design Documents of Housing Construction and Municipal Infrastructure Projects)
The professional qualification of the main structure and steel structure of the construction enterprise requires no less than 2 registered structural engineers at the second level or above.
The construction unit's qualification for major structure must be Grade C or above for building materials.
(4) Environment and equipment: The construction unit has an independent laboratory meeting the requirements of professional inspection, and the laboratory area is not less than 200m2. Inspection equipment must meet the requirements of inspection business, and there can be no subcontracted items; (See attached table)
(5) Professional testing institutions for building structures (including steel structures) must have testing technical resources related to engineering materials.
2. Detection technology ability
The construction unit should have the ability to undertake the detection of related projects required for professional project acceptance. (See attached table)
3. Work performance:
(1) It has been engaged in testing for more than 2 years (inclusive) and has no record of violation of laws and regulations; (2) No less than 30 engineering inspection items or no less than 2,000 material inspection items each year.
Six, the construction project quality inspection project contracting scope
(A) comprehensive qualification standards
Testing institution with comprehensive Grade A qualification: it can undertake quality testing business of various construction projects (construction projects and municipal projects, the same below) across regions, with unlimited scope.
Testing institutions with comprehensive Grade B qualification: they can undertake the quality testing business of medium-sized and below construction projects and medium-sized and below municipal projects in this province.
(2) Professional qualification standards
Testing institutions with Grade-A professional qualification: they can undertake the quality testing business of various construction projects (construction projects, municipal projects) of corresponding majors across regions.
Testing institutions with professional Grade B qualifications: they can undertake the quality testing business of medium-sized and below construction projects and medium-sized and below municipal projects in this province.
Testing institutions with professional Grade C qualification: they can undertake the quality testing business of small-scale construction projects (excluding schools, hospitals and crowded public buildings) and small-scale municipal projects in this province.
Note: 1. See Appendix 3-2 1- 1 Construction Project Design Scale Division Table for details of the scale division of construction projects.
2. For the scale of municipal engineering, see the corresponding provisions in the Qualification Standard for Municipal Industrial Engineering Design and the Scale Classification Table for Industrial Construction Engineering.
Attached Table: Division of Competencies of Professional Testing Institutions
For more information about bid writing and improving the winning rate, click on the bottom customer service for free consultation.