First, architectural modeling
Architectural modeling is divided into plate building, tower and plate tower combination.
1, banlou
Plate buildings are generally transparent from north to south, which is convenient for lighting and ventilation; The standard is one ladder and two households, with few households and quiet home life, which is the best choice for buyers.
2. Tower
The building density of towers is generally higher than that of slab buildings, mostly high-rise buildings with elevators or apartments with 40-year property rights, often with more than 6 households per staircase. Many people are prone to noisy and crowded elevators, and some residents on each floor of the tower have poor lighting and ventilation conditions. However, due to the height of the tower, the high-rise view is relatively wide.
3. Plate tower combination
It is common to combine plates and towers in a house with two ladders and four households. The side door is transparent from north to south, and the middle door is designed to face south. The combination of plate tower is better than tower, but worse than plate building.
Second, the age of the room.
The age of the house affects the loan period. The older the house, the shorter the loan period. The growth of room age is inversely proportional to the service life. When buying a house, you must pay attention to asking whether the age of the house is calculated from the date of completion of the house.
Third, the apartment type
There is no darkroom in the pattern of a good apartment, no lights on sunny days, and sufficient light; Furniture is placed in the room, which does not hinder people from walking; Natural ventilation can be achieved without the help of ventilation equipment. Needless to say, you can recognize a good apartment at a glance.
Fourth, the direction
A good orientation can ensure that a large amount of sunlight directly enters the room through the window, improve the indoor environment of the house, such as light, temperature, hygiene, etc., which is very beneficial to the physical and mental health of the residents. Everyone knows that a house with a bedroom and a living room facing south is definitely better.
Verb (short for verb) floor
For multi-storey houses without elevators, the order of good floors is 3, 4, 5, 2, 1, 6. For high-rise buildings with elevators, the good floor order is middle, upper and lower. Buying high-rise buildings should comprehensively consider the demographic composition and preferences of their families, prices and lighting. No matter the middle level, the top level or the bottom level, there are shortcomings of one kind or another. When buying a house, you should also think carefully.
1, middle layer
The middle floor of a tall building is the equipment floor, and the noise and mechanical vibration of the equipment will have a negative impact on the living environment. If it is a small high-rise, the equipment is located in the basement, and the middle floor is the best. When buying a high-rise suite, you must choose the upper and lower floors or the third floor away from the equipment floor.
2. Top floor
The top floor is mainly characterized by hot summer and easy to leak rain in rainy season. You can choose the floor below the top floor, but the price is higher.
3, the bottom
Easy to be stolen, insufficient lighting and ventilation, damp, and relatively loud noise (the influence of pedestrians and unit door noise). In summer, if the trash can at the door of the unit is not cleaned in time, it is easy to produce stench and affect the living environment.
(The above answers were published on 2018-01-19. Please refer to the actual situation for the current purchase policy. )
For more real estate information, policy interpretation and expert interpretation, click to view.