This means that the datum plane is horizontal and the two sides are vertical.
Sit in an open aluminum frame (without glass door) and make sure it fits and has enough adjustment space (both sides of the frame 10 mm, top 20 mm).
Step 2: Before testing the aluminum frame of the house, make sure that the base is horizontal and the side is vertical or square.
The base may require a horizontal sliding frame.
Step 3: Screw it in place, make sure all the flashlights are in place, and then wedge the side panel.
Fix from top to bottom according to the repair method recommended by the manufacturer.
Don't tighten the screws too tightly.
If you have a sliding door frame with battens: Fix the frame by embedding battens in the wall.
Check and tighten the aluminum frame.
Through maintenance or a wedge next to it, you won't bend the aluminum frame and put it down.
Carefully check the horizontal foundation and vertical integral frame.
Step 4: Install the fixed glass panel. Now the frame is correct and firmly fixed to the internal frame installed on the fixed panel.
To install the fixed panel, remove the panel, push it into the first guide rail, and rotate the bottom guide rail at the bottom.
Then slide the fixing panel firmly to one side and fix it in place.
Please note that some doors are only fixed with screw fixing plates.
This screw passes through the fixed panel of the door frame and enters the main door frame.
Step 5: Install the sliding door and lock it.
The position of the elevator door, first top, and then turn the bottom in place to ensure that the wheels are on the track.
Adjust the door to almost slide closed, and then you can see whether it is perpendicular to the door frame.
If the doors are aligned, adjust the door at the bottom of the wheel with a screwdriver until the door is lowered.