1. Location: Take the East Expressway, cross the Jiaojinshan Tunnel, get off at a 20-meter-high intersection (there is a sign of "Vehicle Inspection Center" near the intersection on the right), go ahead for about a few hundred meters, 20 meters high, and turn right at the sign of "Vehicle Inspection Channel" on the roadside.
2. After climbing a short mountain road from the vehicle inspection passage, reach the external inspection exit. Wait in line.
3. During the external inspection, the extension number staff will give you an extension number (light blue clothes) for free. Remember to open the cover of the front mechanism. The extension staff printed a large number of frames of the train with thin extension paper. After the extension, he will put the extension paper under a list, stamp it and give it to you.
4. Keep walking. When you see a policeman in a police uniform coat, take the initiative to get off and greet you in front of the car, bring your driver's license and the list just now, and sign it for you after the appearance inspection is correct. And tell him the total mileage of your car, and he will write it on the list.
5. Take the list, driving license and owner's ID card to the roadside newsstand to print the inspection list, which line is detected on the inspection list.
6. Drive to the corresponding detection line to queue up to detect vehicles, and detect the tail gas first. Then the staff asked me to sit in the back seat, and the driver was responsible for driving inspection. He will drive to a closed movable door first. There are some big mirrors on the door. He will test the headlights and turn signals. At the same time, someone in the drain below observed the car chassis. Then, the movable door opens, and he tells you to "sit down", then goes forward, brakes with one foot, then goes forward, slams on the handbrake, and then tells you to "drive out".
7. Drive out of the assembly line, turn right to the service hall for review, and park your car in the parking lot in front of the test center hall. Before entering the hall, you have to pay at the rightmost window (100 yuan), and you need to check the ticket (the one with the bar code below). After paying the money, the staff will stamp a circular receipt on the bill and give you a receipt.
8. Go to the audit counter corresponding to the car number line you just checked and give the bill with the payment stamp to the police. The police will print a test result for you (all test data will be recorded on it, and if qualified, it will be marked "passed the test") and give you a blank white registration form.
9. Fill in the vehicle model, license plate number, contact telephone number (landline and mobile phone), owner's name and owner's signature on the registration form. There is a sample on the table by the door for reference.
10. Go to the environmental protection window and give the staff three copies including the inspection certificate and driver's license. He will print a green or yellow label and a small card that has passed the environmental inspection. Stamp the list.
1 1. Check the audit counter corresponding to the train return number and hand over the driving license, three certificates and the third compulsory insurance to the police at the window. If the police pass the inspection, give the list to the opposite staff, and the staff will print the car sticker (car inspection certificate) and the driver's license subpage, even if it is completed.
Finally, you need to get the vehicle inspection pass sticker, the environmental protection pass sticker, the environmental protection pass card, the receipt of 100 yuan and the driver's license certificate to increase the printing time for vehicle inspection.
Million car purchase subsidy