Waterproof coating for interior wall-what brand is good?
1. Oriental Yuhong
Beijing Oriental Yuhong interior wall waterproof coating was established in March 1998, and it is a leading waterproof industrial company in China. It is also the only listed company in China (SZ00227 1), with a production capacity of 8,000,000 square meters for all kinds of waterproof coiled materials and acrylic series.
2. Hongyuan
Hongyuan indoor waterproof coating company has 4 1 modern production lines and the first 2m SBS production line in China. The largest vulcanization production line of EPDM and EPDM comes from Hongyuan.
3. Century Hongyu
Beijing Century Hongyu Interior Wall Waterproof Coatings, a large-scale building chemical material company, is a new building material mainly based on waterproof materials. It is reported that Xinwen 'an factory will be put into production before the end of 20 15.
4. Daxie
Ten brands of waterproof interior wall coatings in Daxie, Liaoning Province, founded in 1998, are recognized trademarks in Liaoning Province, and are large enterprises specializing in the production of waterproof materials.
5. Reid
Ten waterproof coating brands, Guangdong famous brand products, industry standard drawing units and high-tech companies are engaged in waterproof material construction.
6.sika
Founded in 19 10, it is a professional building chemicals company and a global multinational company that produces and operates professional chemical products.
7. Zhuobao
Shenzhen Zhuobao Technology is a high-tech enterprise, mainly engaged in the production of functional building materials and waterproof engineering. The company has six subsidiaries including Shenzhen Material Factory, Suzhou Zhuobao Technology Co., Ltd. and Hubei Zhuobao Building Energy Saving Technology Co., Ltd..
8. Keshun
Kaishun Company was established in 1996, with three large production bases and one base still under construction. It has a series of automatic drainage protective film production lines and drainage protective plates with an annual output of 30 million square meters. Waterproof coating is 30000t, and drainage fender is 5 million m2.
9. Yu Wang
Liaoning brand, as a domestic waterproof faucet. The introduction of international advanced products and equipment, exquisite technology and a series of advanced production lines provide you with products with different functions, which are favored by consumers. Which brand of waterproof coating is good?
10. Golden umbrella
Umbrella Jinyu Waterproof Co., Ltd. covers an area of 100 mu, with a production capacity of 50 million flat rolls and reactive rolls.
It studies technology reactive adhesive CPS in Nanning, and has obtained more than 20 patents, and has acted as an agent all over the country.
Waterproof coating for interior wall-how to use waterproof coating?
1, alkali treatment, the base must be firm and have strong hardness, the appearance should be clean, the surface should be free of dust, sand and other building materials, and the appearance must be smooth and not fall off.
It should be smooth and lumps or protrusions must be removed from the remaining mortar.
2. When processing the details, connect the corner of Yin and Yang with the wall near the floor and apply it as a 20 mm arc ... Once the root of the wall is placed, the cement blocks around the root and the parts on the ground are dyed by eight forms of cement mortar.
Wall-to-wall pipes and seals must be installed firmly, and joints must be tightened. If there is rust and oil stain, please clean it with wire brush or sandpaper. After the primer treatment, there should be no obvious water accumulation in the primer.
3. Stir, pour the material into the bucket, then put a little dust on it and shake it for three to five minutes until a uniform suspension is formed without dust and particles.
4. When painting, use a special brush tool at the primer, with the same strength, and don't brush off; Generally speaking, the thickness of each brush on both sides should not be too thick;
The first time I waited until it was almost dry. Secondary brushing, cross vertical brushing, the total thickness of brushing is usually1-2 mm.
5. Maintenance. After one day's operation, it is suggested to cover the contaminated layer with wet cloth or apply proper amount of water on the contaminated layer for curing.
6, protection, before the operation is completely dry, don't walk on it, acute exposure injury, etc.
7, control including the application of waterproof coating construction site must check its waterproofness, once the impervious layer has been dry and accumulated for more than two days. Lightweight walls should be tested by water spraying.
The above is part of the interior wall waterproof coating compiled by Bian Xiao for you today. Waterproofing is a very important step in the process of home improvement, and everyone should pay more attention to it when decorating. I hope the above content can bring some help to friends in need. Thank you for reading.