1.ps2 original handle (divided into domestic and Japanese original handles)
Mainly tell you the identification of the original handle.
Here's how to identify the original ps2 black shock absorber handle:
1: black handle wire: 4.5mm in diameter and 2.4m in length, with white font "E2 13229 (inverted) ruawm style 283560' C30VW-1sc low-voltage cable doowell" printed on the wire. The lines are soft and will naturally straighten and assemble after a period of use.
2. Handle socket: "Sony" has a concave front and lettering on the back, not PS 1 time paper.
3. Handle surface: pure black outer surface, mixed with a large number of golden luminescent particles, blue "DUAL SHOCK2" written on the left side of the wire inlet, clear raised fonts on the back, uniform thickness, flat font surface without burr or sharp font surface shape, no slight noise when the handle is forcibly twisted, and no obvious hand scraping at the joint of the handle.
4: Keys:
Answer: There is a layer of thin sand on the upper surface of the direction key. The overall pressing range is 0.5-0.7mm, and the one-way pressing range is within1.5 mm. ..
B: Start, selection: ANGNLR key protrudes within the pressing range of 1.0mm, and should not be stuck in the handle housing after being pressed hard.
C: The corners of the square fork ring are embedded and can never be erased. The embedded part and the surface of the key shall be flat and even, and there shall be no dislocation. At present, imitating the original handle is not accurate enough, which is one of the ways to distinguish fakes! The pressing range of the appeal four-key is about 0.7mm, and the surface edge of the key is smooth, which will not scratch the hand, and it is elastic and soft to the touch.
D:LR key: the keys 1 and 2 above are deep, the concave part is vertical, and the cross section must not have steps, which is also one of the ways to distinguish between true and false! The pressing range is about 0.7 mm
E:L3R3 key: The contact surface above the rocker is made of rubber with uneven surface. The key is that the seam below is up and down, not left and right. This may also be one of the ways to argue false, I'm not sure. When playing games with PS's "Parasite Eve", don't stop halfway when running in concentric circles. Otherwise, it is false, which is the most effective way to argue false. Similar games can also use PS. "
Summary: All the buttons are elastic and soft, and the range of pressing and bouncing is very small, and the feel is excellent. If you press them hard, you won't have much action.
5: There are 6 black flat head screws with a length of 7mm on the back. Note that it is a flat head screw! This is also one of the ways to argue false! The imported handle number is domestic1001a.
6. Because the imitation of the original handle can be compatible with all PS2-specific games, players will think that their products are genuine. Only when they play "ICO" will they find the handle awkward? The main difference is L3 analog joystick, which is the pause phenomenon in concentric circles running mentioned above. Some players may disagree. Well, please try Parasite Eve I by PS 1 again. I believe that no player can stand it. The feeling of being lame is beyond description. The imported handle number is 100 10 A!