Create it yourself with stationery.
Plasticine is the predecessor of colored clay. Since its advent in 1956, plasticine has become children's favorite toy. The original plasticine was only gray-white in color, but in the following years, plasticine came in a variety of colors and scents, including luminous, gold, silver, shampoo scent, shaving water scent, etc. Plasticine has a certain viscosity, and it is difficult to take it out after being pressed into the mold. When taken out, the plasticine may easily deform. In response to the above problems, the Chinese patent publication number cn207270718u discloses a rubber clay mold that is easy to demould, including a mold shell. A magnet is provided at the center of one side of the mold shell, and is provided on both sides of the magnet. There is a magnet slot, a switch is installed on the outer wall of one side of the mold shell, and a button battery is provided inside one side of the mold shell. Button battery slots are provided on both sides of the button battery. The mold shell has A mold clamping block is provided inside the other side, small colored lights are symmetrically arranged on the outer wall of the mold shell, and a bottom plate is installed below the mold shell. The above solution can flip the bottom plate open through the rotating shaft, reducing the contact area between the molded plasticine and the mold shell, so that the molded plasticine can be taken out by its own weight without touching it, avoiding the need to remove the rubber from above. The problem of plasticine being damaged during the claying process can play a role in protecting the plasticine model. At the same time, the utility model proposes a new solution to solve this problem.