Hello! Bone grinding mandibular angle plastic surgery:
1. Bone grinding mandibular angle plastic surgery. This kind of surgery uses a grinding head to remove the outer cortical bone of the mandibular angle and body of the mandible without removing the mandibular angle. Sometimes, a suitable grinding head can be used to grind away a little or slightly lift the mandibular angle. The thickness removed is limited. It is only 5~6mm at most, and the improvement effect is not obvious.
Advantages: Simple operation, safe, less bleeding.
Disadvantages: Limited effect. It is suitable for those who have a suitable mandibular angle and a wide mandibular angle when viewed from the front.
Osteotomy and mandibular angle plastic surgery
2. Osteotomy and mandibular angle plastic surgery, or tangential osteotomy and mandibular angle plastic surgery. This kind of surgery first uses a ball drill to drill holes or carve grooves, and then uses a thin osteotome to remove the mandibular angle and the outer mandibular plate, or uses a rifling saw to directly cut off the outer plate of the mandible, retaining the cancellous bone and inner plate. . Like the bone grinding method, the mandibular angle is not removed, so the original curvature of the mandible is retained, but the width of the mandibular angle is narrowed, and the side view is not greatly improved.
Advantages: Preserve the original mandibular curvature, suitable for those who want to narrow the width of the mandible while retaining the mandibular angle.
Disadvantages: The range of improvement is limited; since the osteotome is used to split during the operation, violent operation may cause fractures, and the risk of damage to the inferior alveolar nerve also exists.
Long curved mandibular angle plastic surgery
3. Long curved mandibular angle plastic surgery. This kind of surgery uses a curved saw to make a curved osteotomy at the mandibular angle, widening the distance between the cutting line and the mandibular groove nerve. The side view is greatly improved; the masseter muscle loses its attachment to the mandibular angle and slowly atrophies. At the same time, It also solves the problem of masseter muscle hypertrophy. In order to create a beautiful curve of the mandible, sometimes part of the bone on the outer edge of the mandible needs to be removed, and it needs to be coordinated with the curve of the jaw.
Advantages: one cut, one effort, little damage, short time, fast recovery. It is performed based on the aesthetics of the mandibular angle and the distance between the incision line and the mandibular groove nerve is enlarged, which has low risk and is consistent with the force-bearing principle of the mandibular angle. Special mandibular angle instrument to solve the problem of outer plate and inner plate. The curvature of the mandibular angle is in line with aesthetics and has a beautiful appearance. Very little sanding is required after a single cut.
Mandibular angle plastic surgery restores the normal shape of the mandibular angle by removing the overly protruding part of the mandibular angle, transforming the face into a beautiful oval or melon-shaped face.
1. The mandibular angle is obviously enlarged and everted, giving an obvious "square face" or "trapezoidal face".
2. Unilateral or bilateral mandibular angle protrusion, asymmetry on both sides.
3. The proportion of the upper and lower width of the face is uncoordinated, and the distance between the two mandibular angles is close to or greater than the width between the two zygomatic processes.
The mandibular part mainly includes three parts: chin, mandibular margin and mandibular angle. The aesthetic appearance of the mandible often depends on the degree of hypertrophy of the mandibular angle. Under normal circumstances: the chin has square, round, flat and hypertrophic types, etc. In the case of abnormality or deformity: the chin may protrude to form the so-called "spotted sky" after surgery, and the chin may retract to form the so-called "bird's beak" deformity. The mandibular margin is hypertrophic, curved and uneven. The mandibular angle can be classified into hypertrophic, valgus, varus, and bilateral asymmetrical types. Genioplasty is a surgery performed to address these mandibular problems.
Chinese-shaped face and square face can be corrected through mandibular plastic surgery to create an oval face or an oval face. Mandibular plastic surgery mainly removes or polishes the wide part through an intraoral incision. Although this surgery has good postoperative effects, it also causes certain trauma to the human body. There will inevitably be corresponding complications after surgery. Mandibular angle plastic surgery Hospital experts will perform targeted mandibular angle plastic surgery based on the patient's personal condition to beautify the contours of the jaw and face and completely change the unsatisfactory facial shape.
The important purpose of mandibular plastic surgery is to remove the enlarged mandible. It is necessary to make a clear diagnosis before surgery. Whether the mandibular hypertrophy is a normal psychological state or a pathological abnormality, such as pathological Bone proliferation or tumors require further systematic and comprehensive search and comprehensive surgical treatment. If you are not satisfied with the benign condition of a simple mandible, you can consider surgery to remove part of the mandible. Before surgery, it is necessary to determine the level and extent of mandibular hypertrophy, and measure and predict the extent of mandibular hypertrophy and the amount to be removed.
If you want to have plastic surgery, it is recommended that you go to a regular hospital or plastic surgery institution. Hope it will be adopted.