A 2-meter-deep fish pond uses a 2.2-kilowatt microporous aeration oxygenator, so that the aerator can cover an area of ??30-40 acres.
This type of aerator generally produces bubbles at the bottom of the water. The bubbles can spread to a range of about 3-4 meters. In order to expand the area of ??oxygenation, an underwater aeration disk with a diameter of 1.2 meters can be installed. , thereby producing a vortex bubble flow, thereby ensuring that the dissolved oxygen content at the bottom of the water body is about 6.5 mg per liter.
1. Which is the best aerator for 2-meter-deep fish ponds? A 2-meter-deep fish pond uses a 2.2-kilowatt microporous aeration oxygenator, so that the aerator can cover an area of ??30-40 acres. .
This type of aerator generally produces bubbles at the bottom of the water. The bubbles can spread to a range of about 3-4 meters. In order to expand the area of ??oxygenation, an underwater aeration disk with a diameter of 1.2 meters can be installed. , thereby producing a vortex bubble flow, thereby ensuring that the dissolved oxygen content at the bottom of the water body is about 6.5 mg per liter.
2. What are the fish pond aerators? 1. Aeration aerator: The host of this aerator is an air compressor or a blower. After the air is pressurized, it can pass through the sand filter installed underwater. Expelling small bubbles will cause water movement as the bubbles rise, allowing oxygen to dissolve in the water, thus increasing oxygen.
2. Jet aerator: The jet aerator is composed of a submersible pump and a jet tube. The water in the water pump will be sprayed out from the jet tube, and the negative pressure generated will suck in air. In this way, after the water and air are mixed and pressed out through the diffusion tube, the dissolved oxygen will be increased.
3. Water-jet aerator: The water-jet aerator uses a water pump to put water into the middle of the fish pond and the nozzles on the shore, so that the water will fall from the air, and the effect is similar to rain. , when water and air come into contact, it can increase dissolved oxygen, but it is only suitable for small fish ponds.
4. Waterwheel-type aerator: When the waterwheel-type aerator is working, its blades will hit the water at high speed, thereby bringing air into the water to achieve the purpose of oxygenation. .
5. Impeller-type aerator: The impeller-type aerator increases dissolved oxygen by stirring the water body. The whole machine is usually placed in the middle of the pond and fixed with ropes. When working, the upper and lower water layers are generated Convection, so that the overall dissolved oxygen gradually becomes balanced.