Internal floating magnetic level gauge/viscous medium level gauge
□ Overview
Internal floating magnetic level gauge/viscous medium level gauge The meter is a patented product exclusively produced by Liaoyang Fuji Instrument Co., Ltd. using the technology of Canadian JKS Company. It is a special liquid level measuring instrument developed for highly viscous media. This product is a technical upgrade based on the magnetic float level gauge, which completely overcomes the long-term inaccurate measurement of viscous media by the magnetic float level gauge, the adhesion of the liquid inside the cavity to the float, and the difficulty in maintenance.
The internal floating magnetic level gauge is a double-chamber liquid level gauge. The medium to be measured is isolated from the cavity at the magnetic panel end. The inside of the cavity at the container end and the float are specially treated to ensure that the float follows Changes in liquid level are linearly transmitted to the magnetic panel and clearly and accurately indicate the height of the liquid level. It can display on-site, take into account alarm control and output remote transmission signals. It is a multi-purpose liquid level measuring instrument, and is the best liquid level measuring instrument for measuring viscous media.
□ Advantages
1. Wide viewing window, high sensitivity;
2. Fully sealed, safe and leak-free;
3. Integrated Chemical structure, easy to install, use and maintain;
4. Resistant to viscosity, corrosion, high temperature and high pressure;
5. The liquid level meter can directly read the liquid on site position, and can also set up a liquid level alarm and transmitter to realize remote transmission of liquid level signals.
□ Main technical indicators
Measurement range: H≤10m
Accuracy: ≤±10mm
Measurement principle: buoyancy balance and Magnetic coupling principle
Measurement medium: used in modified asphalt, coal tar, crude oil, heavy oil, diesel, residual oil, chemical coatings, paint, coal slurry and other viscous media
Output form : On-site display, alarm, transmitter output
Working pressure: ≤10MPa
Media temperature: -30℃—550℃
Media density: ≥0.45 g/cm3
Medium viscosity: ≤50CP
Connection method: flange connection DN50, special requirements
Explosion-proof grade: ExdⅡBT4
Installation method: side mounting
Application scope: dirty, sticky, particulate, fibrous, corrosive media
This product is exclusively produced and sold by Liaoyang Fuji Instrument Co., Ltd.