Specification and model of magnetic flap level gauge

1.JZ-UFZ Side-mounted magnetic turnover level gauge Product overview: The magnetic float level gauge is installed on the extension pipe outside the bathtub, and the liquid level in the bathtub can be clearly known through the turnover indicator. A magnetic switch can also be installed outside the bypass pipe as the signal output of the electric contact, or a liquid level transmitter can be installed for remote liquid level signal transmission and liquid level control. Liquid level gauge is a reliable safety instrument. Due to the closed structure of magnetic coupling isolation, it is especially suitable for liquid level detection of flammable, explosive and corrosive toxic liquids. So that the original liquid level detection method in complex environment becomes simple, reliable and safe. The liquid level meter has the direct reading characteristic of local display. There is no need to combine multiple groups of liquid level meters. There is a unit for full range measurement. The equipment has the advantages of few holes, clear display, eye-catching signs and intuitive reading. When the liquid level meter is directly equipped with a display instrument, the intermediate transmission of system signal detection can be omitted, thus improving its transmission accuracy. Normal working conditions: ambient temperature -25℃~70℃, relative humidity 5%~ 100% (including condensation and direct humidity), atmospheric pressure 86 MPa ~ 108 MPa, measuring range 500 mm ~ 3000 mm, step by step. Measurement accuracy: the working pressures of the 20mm float indicator and the 20mm column turnover indicator are 1 MPa, 1.6 MPa, 2.5 MPa, 4 MPa and 6.3 MPa, and the medium density is 0.5g/cm3~ 1.8g/cm3. The viscosity of the medium is less than or equal to 0.05 Pa/s, the temperature of the medium is -25~80℃, the temperature of the high-temperature type is 0~200℃, the tracking speed of the patented high-temperature type is less than or equal to 0.8 m/s, and the control point error 1Cr 18Ni9Ti PTFE contact dielectric material 10 mm return error does not exceed the basic error. The repeatability error shall not exceed the basic error. The contact capacity of the control point is AC or DC220V 1A (pure resistive load). The minimum distance (mm) between control points is 60. Enclosure protection grade IP54 display instrument XMT- 124D digital display table (upper and lower limit alarm and output of 4~20mA signals can be set). Overall dimensions are 160× 80× 188. Compared with UIZ built-in level gauge, JZ-UFDZ overhead magnetic flap level gauge is cheap and suitable for working in flammable, explosive, toxic, corrosive and volatile environments. It is a special type of UFZ side-mounted magnetic flap level gauge, which has the characteristics of safety, reliability, convenient observation and clear liquid level indication. Widely used in oil depots, underground storage tanks, oil tanks and other containers and food.