What should I do if the drain of sterilizer is blocked?

The drain pipe of the sterilizer is blocked. You can remove the drainage filter and clean it. If it still doesn't drain, open the pipe at the joint between the pot body and the drain pipe and check whether it is blocked.

Then check the discharge solenoid valve. If there is steam in the pressure gauge, check whether the joint leaks, tighten it with tools, and the water injection time is too long. Check whether there is any foreign body blocking in the water level gauge, so as to dredge the pipeline or clean the probe.

Mainly introduce

Sterilizer is also called steam sterilizer. Laboratory sterilizers can be divided into portable sterilizers and vertical sterilizers. A device for heating water with electric heating wires to generate steam and maintain a certain pressure. It mainly consists of a sealed barrel, a pressure gauge, an exhaust valve, a safety valve and an electric heating wire.

Adopt microcomputer intelligent automatic control, control sterilization pressure, temperature and time, over-temperature automatic protection device, automatically cut off the heating power supply when it exceeds the set temperature, door safety interlock device, pressure in the inner cavity, door cover can not be opened, patented device.

Low water level alarm, automatic power-off due to water shortage, acousto-optic alarm, imported water-off detection device, leakage protection, equipped with leakage protection device, dynamic digital display of temperature, end signal after sterilization, automatic control of heating, sterilization, exhaust and drying process without manual supervision.