1. Roll coating method: firstly, move the wool roller dipped in paint solution in W mode, and roughly coat paint on the base, then roll the wool roller dipped in paint solution up and down, left and right against the base, so that the paint solution is evenly coated on the base, and finally roll it all over in a certain direction with the wool roller dipped in paint solution. Internal corners and upper and lower mouths should be brushed with a brush.
2. Spraying method: The pressure of spray gun should be controlled at 0. 4~0。 Within the range of 8MPa. When spraying, the spray gun should be perpendicular to the wall, the distance should be about 500mm, and the spray gun should move in parallel at a uniform speed. The overlapping width of two lines should be controlled at 1/3 of the spraying width.
3. Brush coating method: it is carried out in the order of left and right, up and down, easy and difficult, and edge and back first.
Textured coating
Texture coating structure