Fluorocarbon paint refers to paint with fluororesin as the main film-forming substance; it is also called fluorocarbon paint, fluorine paint, fluororesin paint, etc. Among various coatings, fluororesin coatings have particularly superior properties due to the large electronegativity of the introduced fluorine element and the strong carbon-fluorine bond energy. Weather resistance, heat resistance, low temperature resistance, chemical resistance, and unique non-stick and low friction properties. After decades of rapid development, fluorine coatings have been widely used in various fields such as construction, chemical industry, electrical and electronics industry, machinery industry, aerospace industry, and household products. It has become the coating brand with the highest comprehensive performance after high-performance coatings such as acrylic coatings, polyurethane coatings, and silicone coatings. At present, there are three main types of fluororesin coatings that are widely used: PTFE, PVDF, and PEVE.
(1) Technical characteristics
1. Improved coating durability: The fluorocarbon metal paint synthesized from fluorocarbon resin emulsion and metal aluminum powder is more durable than ordinary silicone acrylic or acrylic resin. Emulsion-synthesized metallic paint has greatly improved its durability (ie, anti-aging performance) and is called super-durable paint.
2. No need for topcoat protection: Due to the improvement in the performance of fluorocarbon paint in many aspects such as acid and alkali resistance, ultraviolet radiation resistance, weathering resistance, water resistance, and antistatic properties, its coating no longer requires Protect with topcoat. In terms of technology, you only need to spray the metallic paint without applying the topcoat layer.
3. The metallic luster is more prominent: The purpose of metallic paint must be to have metallic luster, otherwise it will lose its meaning. Because the emulsion transparency of fluorocarbon metallic paint is purer and higher, the metallicity is easier to show.
(2) Precautions
1. The construction temperature is 0-35℃, and the base surface temperature is preferably not lower than 5℃.
2. When storing materials, pay attention to moisture, water, and direct sunlight.
3. The gloss is consistent and no sagging or missed coating is allowed.
4. The amount of ingredients should not be too much each time to avoid standing for a long time and causing solidification.
5. Be sure to use special supporting auxiliary materials. Water, banana water, alcohol, gasoline, etc. are strictly prohibited.
6. The humidity is below 85% and the temperature is 0-35℃. Do not construct under the following conditions: rain, snow, fog, frost, strong wind, or relative humidity above 85%.
7. It takes about 7 days for the paint film to be fully cured after painting at room temperature. It is recommended not to use it in advance.
8. Safety measures and prevention methods: Ensure good ventilation, wear protective equipment, and prevent contamination of skin and eyes. If paint splashes into your eyes, rinse immediately with clean water and seek medical advice. Fireworks are strictly prohibited in the construction environment.
9. The cost is much lower than that of aluminum-plastic panels, but it can achieve the same effect;
10. It is light in weight and will not bring a heavy burden to the wall. There is no aluminum Risk of falling plastic panels. Professional production, strong environmental protection, factory direct sales, technical support. Color matching can be done according to your needs.
11. The prepared fluorocarbon paint must be used up within 5 hours to avoid it becoming invalid after the activation period.
12. The fluorocarbon paint should be kept dry, waterproof, leak-proof, sun-proof, high-temperature-proof, and away from fire sources.
13. After opening the can, filter it with 120-200 mesh before use.
/link?url=u4FWYBDijPG6NSnC8hcqJ1DZwglXuOo717ZvMmAlM5j-n8u36utpQ2gzdWNvLWXcubgwMVGWf32wSy2MZgqYLWV3JTKinnN3GTukDMpdxs3cVS-XYYW6WWwiX5vFPIn41PiCY NVnvr4hLvVMAnuyXBx0XzUhH-kId-X1U9bGK_G#5