The mouse has five basic operations: pointing, clicking, double-clicking, right-clicking and dragging.
(1) Pointing: Move the mouse until the mouse pointer points to an object.
(2) Left click: Click the left mouse button once, and then release it. Point the mouse pointer in a certain direction, and then click the left mouse button quickly to select an object.
(3) Double-click with the left mouse button: Double-click the left mouse button and then release it quickly and continuously. It is usually used to start programs and open windows.
(4) Right click: click the right mouse button once and then release it, which is used to open or pop up the shortcut menu of the object.
(5) Drag: Move the mouse to the object and hold down the left mouse button. After dragging the mouse to the specified location, release the left mouse button, which is mainly used to move the location of objects and copy files.
Extended data:
Operating instructions:
The mouse is a device that controls the cursor position manually. This system usually uses two keys or pc mouse.
The mouse is connected with the interface of the backboard of the host equipment through a mouse cable, and the plug at the end of the mouse cable is vertically inserted into the interface of the backboard of the equipment.
Operating the mouse can do the following things: determine the cursor position, select the menu item to run from the menu bar, move the copied files between different directories and speed up the file movement.
You can define mouse buttons, such as selecting an object or giving up. These functions depend on the software used.
Precautions for use:
You should be careful when using the mouse. Improper use will damage the mouse. When using the mouse, you should pay attention to the following points:
1. Avoid using the mouse on clothes, newspapers, carpets, rough wood and other surfaces with low finish;
2. It is forbidden to click the mouse;
3. The mouse should not move in the box;
4. It is forbidden to use the mouse under high temperature and strong light;
5. It is forbidden to put mice into liquid.
References:
Baidu encyclopedia-mouse
Basic mouse operations include pointing, clicking, double-clicking, dragging and right-clicking.
1, pointing: refers to moving the mouse and moving the mouse pointer to the operation object.
2. Click: refers to quickly pressing and releasing the left mouse button. Click is generally used to select the operation object.
3. Double-click: refers to pressing and releasing the left mouse button quickly for two consecutive times. Double-clicking is usually used to open a window and start an application.
4. Drag: refers to the operation of holding down the left mouse button, moving the mouse to the specified position, and then releasing the button. Drag is generally used to select multiple operating objects, copy or move objects, etc. , can also be used to drag the window.
5. Right button: refers to pressing and releasing the right mouse button quickly. Right-click is generally used to open shortcut menus related to operations.
The mouse is the external input device of the computer and the indicator of the vertical and horizontal coordinate positioning of the computer display system, so it is named because it looks like a mouse (Hong Kong and Taiwan are mice). Its standard name should be "Mouse" and its English name is "mouse". The use of the mouse is to make the operation of the computer easier and faster, rather than the tedious instructions of the keyboard.
The mouse was invented by Dr DouglasEngelbart of the University of California, Berkeley in 1964. At that time, DouglasEngelbart worked at the Stanford Research Institute (SRI) sponsored by Stanford University. Douglas Engelbart has long been thinking about how to make the operation of the computer easier and what means to replace the tedious instructions entered by the keyboard. When applying for a patent, his name was the X-Y position indicator of the display system.
What are the basic operations of the mouse?
Five basic mouse operations
(1) Move: Move the mouse until the mouse pointer points to an object.
(2) Click: Click the left mouse button with your finger, and then release it. Click is usually used to select an object, press a button, etc.
(3) Drag: hold down the left mouse button or the right mouse button and move the mouse at the same time, which is called "drag". Drag is mainly used to move and copy objects.
(4) Right click: Click the right mouse button with your finger, and then release it. Right click is mainly used to pop up shortcut menu.
(5) Double-click: Click the left mouse button twice quickly and continuously with your fingers, and then release it. Double-clicking is usually used to open windows and execute programs.
What are the five basic operations of the mouse?
Five basic mouse operations
1, mobile phone
Move the mouse until the mouse pointer points to an object.
Step 2 click
Click the left mouse button with your finger, and then release. Click is usually used to select an object, press a button, etc.
Step 3 drag
Holding down the left mouse button or the right mouse button while moving the mouse is called "dragging". Drag is mainly used to move and copy objects.
4. Right click
Click the right mouse button with your finger, and then release. Right-clicking is often used to pop up a shortcut menu.
Step 5 double click
Click the left mouse button twice quickly and continuously with your finger, and then let go. Double-clicking is usually used to open windows and execute programs.
Precautions for mouse use:
1, before using the mouse, be sure to read the instructions of the mouse carefully and operate according to the requirements in the instructions.
2. When cleaning the mouse, don't rinse it directly with water. If the mouse is not waterproof, it may be washed out.
3. The wiring part of the mouse should be kept as dry as possible. In case of leakage, the wire part has been damaged, and someone should be found to repair it immediately.
Don't knock hard when using the mouse, especially when we are in a bad mood when playing games.
5. Don't plug the mouse into the same socket with high-power electrical appliances, so as to avoid overcurrent and overload, which may cause fire hazards.
What are the basic operations of the mouse? What are their functions?
Basic mouse operations include pointing, clicking, double-clicking, dragging and right-clicking.
1, pointing: refers to moving the mouse and moving the mouse pointer to the operation object.
2. Click: refers to quickly pressing and releasing the left mouse button. Click is generally used to select the operation object.
3. Double-click: refers to pressing and releasing the left mouse button quickly for two consecutive times. Double-clicking is usually used to open a window and start an application.
4. Drag: refers to the operation of holding down the left mouse button, moving the mouse to the specified position, and then releasing the button. Drag is generally used to select multiple operating objects, copy or move objects, etc. , can also be used to drag the window.
5. Right button: refers to pressing and releasing the right mouse button quickly. Right-click is generally used to open shortcut menus related to operations.
Precautions for using the mouse
Users are advised to equip the mouse with a good mouse pad. The mouse pad has a considerable influence on whether the mouse is easy to use, which can not only greatly reduce the chance of dust entering the mouse through the rolling ball, but also increase the friction between the rolling ball and the mouse pad, making the operation more handy. Do not hit the key hard when using, so as to avoid the damage of the elastic switch and the failure of the control key.
When using, pay attention to keep the photosensitive plate clean and in a good photosensitive state, so as to avoid dust adhering to the light-emitting diodes and photosensitive diodes, blocking the reception of light and affecting normal use. Don't press the mouse button too hard to avoid hitting the mouse, so as not to damage the elastic switch or other components.
What kinds of common mouse operations are there, and what kind of operations can they accomplish?
Common mouse operations are as follows:
1. Positioning: Move the mouse to some links and the corresponding options will pop up.
2. Left Click: When the mouse cursor is positioned on the file, click the left mouse button to select the file.
3. Double-click with the left mouse button: position the mouse on the file and double-click the left mouse button to open the file; Double-click the left key on the title bar of the window to maximize and window the window.
4. Drag: Hover the mouse over the file, hold down the left mouse button, and drag the mouse to the specified location (also available in some software).
5. Drag and drop copy: drag a file in one window to another window, and you can copy a copy of the file to another window; Hold down the Shift key while dragging, and then cut the file to another window.
6. Batch selection: hold down the left mouse button and slide the mouse to select all files in the rectangular selection area where the mouse slides.
7. Right mouse button: The function of the right mouse button is less, and it is mainly used to open the corresponding menu. For example, right-click a file to open a shortcut menu, and you can copy, paste and cut the file.
8. Roller: The roller can turn pages. In the browser, Word and other windows, hold down the Ctrl key to scroll the wheel to zoom the page; In PS, AI and other software, you can also zoom the page by holding down the Alt key to scroll the wheel.
9. Press the wheel: When browsing a long document or webpage, you can press the wheel down to open the automatic page turning mode, and click the left mouse button or the right mouse button to close the automatic page turning mode.