To prevent bedsores on an air mattress, you generally need to lay the air mattress on the bed, and lay a layer of sheets on the surface. Find that the air mattress has two inflatable tubes, which can be connected to the inflatable tube mouth of the host machine. Finally, you need to insert Turn on the power and it can be used normally.
Anti-decubitus air mattresses are the greatest boon to bedridden patients. When using them, lay the mattress face up on the bed, connect the air mattress and pump through the connecting tube, connect the power supply, and turn on the switch. , start inflating. Check for air leaks, lay a large sheet on the air mattress, and adjust the time interval between inflation and deflation.
Strip wave type: good breathability, good waterproofing, good elasticity, each strip can be replaced individually. The patient lies on the mattress, which can be continuously inflated for 24 hours. The surface of the mattress fluctuates and has ventilation. Long-term use can prevent bedsores.
Precautions for preventing bedsores on air mattresses
1. The air mattress should avoid contact with sharp objects to prevent the air bag from being scratched.
2. When cleaning the air bag, you should scrub it gently with soap or laundry detergent. You can lay a thin layer of cloth on the air cushion for easy cleaning.
3. The effect is better when the air mattress is placed flat on a hard board bed.
4. During installation and use, each connecting hose should be checked to avoid bending to keep the air path open.
5. When used for the first time, it takes about 10-15 minutes for the host to inflate the air cushion before use.
6. Users should not disassemble the main air pump by themselves.
7. Store the air cushion in a room with a relative temperature no greater than 80%, no direct sunlight, no corrosive gases, and good ventilation to achieve moisture-proof effect.