What are the fc elimination steps of Kelon Air Conditioning?

Indicates full cleaning, prompting to clean the filter screen, just press the button on the remote control, and the appearance of fc indicates that the air conditioner has not been cleaned for a long time. Select the function key of the air conditioner in the air supply state, run for 3 ~ 4 hours to let the moisture in the air conditioner dry, then turn off the air conditioner and pull out the power plug; You can also clean the dirt on the air conditioner shell with a soft dry cloth, or scrub it with warm water. Never scrub with hot water or flammable oil. 1. Press the key on the remote control (press the high-efficiency key continuously for 5 seconds, and the remote control will send out the cleaning reset code) to clean and reset the filter screen. (This scheme is a general scheme) 2. Through the operation of the indoor controller "panic button", the filter screen can be cleaned and reset; In the state of cleaning prompt, press "panic button" once to reset and cancel the cleaning prompt, and panic button will restore its original function. (If the controller is designed with a dedicated clean reset key, it is best to use the clean reset key. ) 3. After exiting the cleaning prompt state, the air conditioner returns to the normal display and operation state, and the accumulated timing of the fan is reset. It shows FC, which is Kelon's patented technology-the filter screen is full of dust, prompting to clean the filter screen, and the word FC will disappear after cleaning! If it is not cleaned up in time, the word FC will be displayed every time it is turned on!