Several types and effective techniques of wheat straw wall technology.

Wheat straw wall technology, wheat straw wall material is one of three types; Extruded straw wall materials: Straw extrusion raw materials, such as straw, straw, plant fiber and other wall manufacturing technologies, are supplied at high temperature and high pressure without adding any adhesive, which highlights the strength of wall materials under high temperature and high pressure conditions and adheres it as an integral part. This solid object can be rigid or hollow. Wheat straw wall technology is a special paper attached to the surface of finished products, which must be reworked in the actual construction process. Secondly, as a wall component, the functions of flame retardant, waterproof and corrosion resistance of straw, rice straw, sawdust and inorganic materials are based on other plant fiber materials. Wheat straw wall technology is widely used in buildings and has a certain impact on the market. Thirdly, the straw lining material strength optical plate pressing method: in the two-step manufacturing process, it is regarded as a step forward. In the second step, the mortar or gypsum board covering both sides of the straw lining material can be used as an internal partition to make a composite wall. It is estimated that the cost of this composite wall is lower than the current new wall, so it has a good development prospect.

The craft wall of wheat straw wall is an important part of architecture. Its function is to load, close or separate spaces.

In order to achieve the above objectives, the embodiment of the invention adopts the following technical scheme:

The wheat straw wall is technically fixed on the wall of the shell, a new straw on the partition wall, a fixed piece and an outer lower connector, and an interlayer filling material. Outside the panel of the shell wall, water suction pipe holes are arranged in the slot structure for connecting various parts in the wallboard, and a lower fixing piece and a waterproof net are arranged in each slot structure; the fixing piece and two side edges of the side wall are fixedly connected to the upper layer and the lower layer, and adjacent panel pins are connected with each other through side pieces.

The invention has the beneficial effects that the wallboard is fixed on two walls of the shell, and comprises a new rod partition wall fixing piece, a fixing piece and an outer lower connecting piece; Thermal insulation fillers filled between the two layers are arranged on both sides of the wallboard, and the wallboard is provided with through holes and waterproof nets on the outer surface of the straw board. Through the lower end of the fixing member, the fixing member and the groove structure are fixed and connected at the upper and lower layers, and adjacent panel coils are connected to each other through side edge portions. Bare wall, building materials of the third wall and cement mortar shell wall, steel wire is very hard, there is a surface resistance net, there is no picture of a car, the wall does not crack, and the marble bricks are not burned. The manufacturing process and mechanized production of combustion-grade wallboard can reduce the installation load of bare cement, as well as a wide range of raw materials, simple construction technology, and ensure comprehensive human resources and construction period, especially wallboard fixing devices, ceilings and grounding frames.