The main features of ceramic tile adhesive are high bonding strength, water resistance, freeze-thaw resistance, good aging resistance and easy construction. It is a very ideal bonding material. So today I will introduce the ceramic tile adhesive, I hope it can help you.
1. Introduction to tile adhesive
Tile adhesive, also known as tile adhesive or adhesive, viscose mud and other names, is a new material for modern decoration, replacing The adhesive force of traditional cement yellow sand is several times that of cement mortar and can effectively stick large ceramic tiles and stones to avoid the risk of bricks falling off. Good flexibility to prevent hollowing during production. This product is a polymer-modified cement-based tile adhesive, which is divided into No. 1 (ordinary type), No. 2 (enhanced type) and No. 3 (larger size ceramic tiles or marble).
2. Introduction to the use of tile adhesive
Regarding the construction technology of tile adhesive: when using tile adhesive to lay ceramic tiles, you can use the traditional spot pasting method, which is to mix the glue Apply to the back of the tile before attaching it to the substrate. However, this pasting method can easily cause hollowing, so we strongly recommend using the scraper method. The specific method is as follows:
1. Use a toothed scraper to apply the glue on the working surface to make it even. Distributed and formed into a tooth shape. Apply about 1 square meter each time (depending on the weather temperature) and then rub the tiles on it during the drying time;
2. When choosing the size of the toothed scraper, the working surface should be considered The flatness and the concave and convex degree of the back of the tile;
3. If the groove on the back of the tile is deep or the stone and tile are larger and heavier, double-sided glue should be applied, that is, on the working surface and the tile. Apply glue to the back at the same time.
Tile adhesive brands
1. DAVCO tile adhesive?: one of the leaders in the domestic special dry mortar industry, one of the top ten tile adhesive brands, and the world's most important construction mortar company.
2. MAPEI tile adhesive?: Italian brand, leader in the field of adhesives and supporting production for floor and wall installation, one of the top ten tile adhesive brands.
3. CERESIT tile adhesive?: German brand, one of the most international multinational groups in the global market, one of the top ten tile adhesive brands, and one of the top ten waterproof coating brands.
4. Bostik tile adhesive?: A subsidiary of the French Total Group, it is one of the world's largest manufacturers of adhesives and sealants, one of the top ten tile adhesive brands, and a world-famous brand.
5. BASF tile adhesive? Originated in Germany, it is the world's leading provider of automotive coatings and general industrial coatings, one of the top ten tile adhesive brands, and is known as the most admired chemical company in the world.
6. Australian Nenggao ceramic tile adhesive?: Australian brand, a large multinational group specializing in the manufacturing of dry mortar and polymer additives, a highly influential brand, and one of the top ten ceramic tile adhesive brands.
7. Yuchuan tile adhesive: Asia’s largest dry mortar manufacturer with a number of national patents. It is a very influential brand of ordinary mortar and one of the top ten tile adhesive brands.
8. DUNSHI tile adhesive: a well-known trademark in China, a subsidiary of Jidong Cement Group, one of the largest dry powder mortar manufacturers in China, and one of the top ten tile adhesive brands.
9. Yuhong YUHONG ceramic tile adhesive: national high-tech enterprise, China famous trademark, Beijing famous brand product, top ten ceramic tile adhesive brands, and Beijing famous trademark.
10. Zhubang Ceramic Tile Adhesive?: The largest and most complete dry-mixed mortar manufacturer in the central and western regions, one of the top ten ceramic tile adhesive brands, and a green and environmentally friendly new building materials enterprise.
How to remove tile adhesive
1. Use a hair dryer and place it on the tile in a corner. ?Use the heat of a hair dryer, set on high and moving slowly, to heat the entire surface area of ??the tile. Your goal is to soften the tile adhesive.
2. Go back to the first corner and keep the hair dryer on for a few minutes, then gently scrape the board, working to pry the corner of the floor. Gently slide the shovel down to loosen and remove the tile.
3. When laying new tiles, you must remove all old adhesive. ?Using a hair dryer, soften the adhesive and gently scrape off as much adhesive as possible.
4. If there is a large amount of adhesive, use a piece of dry ice. Dry ice adhesive. Wait until the dry ice freezes the old glue. Quickly remove any lumps with an adhesive scraper. Move the dry ice to a new section and repeat.
5. The final glue removal method involves the use of lemon-based tile adhesive. This type of agent is the least toxic. ?Soak the tile adhesive in the wet cloth for over an hour. Then lightly rub the adhesive against the adhesive.
6. Use a scraper to remove as much adhesive as possible.
7. Smoothly finish the subfloor once the old glue has been removed. New glue and tiles require smooth, clean subfloors.
How to successfully remove tile glue from the wall without damaging the wall
1. Apply some small portion of water glue. ?If the adhesive is an organic adhesive, the water will begin to soften, allowing you to scrape it off. If a strong adhesive, water won't be effective, test just a small area to avoid potential waste of your time.
2. Find a way to make a tile adhesive or a citric acid or soy base; these products have lower VOCs (volatility) and require ventilation than chemical products. Wear gloves and take precautions, such as placing plastic wrap over the work area, when using such disinfectants.
3. Let the glue on the wall soften. ?Check the glue frequently; some adhesives require more re-dissolved adhesive than others. ?Never leave this product for too long as it may harden again. ?When the glue softens and can be easily cut through the putty knife, it is ready.
4. Use a putty knife to scrape off the soft glue from the wall. If stubborn spots remain, apply an additional layer of adhesive, or use a hammer and chisel to gently break up hard spots.
3. Precautions for using ceramic tile adhesive
1. Use an electric mixer to stir for the best effect;
2. The water-to-powder ratio may vary depending on the substrate, weather, and construction. Make appropriate adjustments according to different conditions;
3. When constructing on rainy days, sheltering and protective measures must be taken, and make sure that the construction area is not wet by rainwater within 24 hours after laying the tiles. ;
4. The glue should be used within 2-3 hours according to weather conditions;
5. Do not mix the dried glue with water before using it; 6. After the tile laying is completed, the next step of filling can only be carried out after the glue is completely dry (about 24 hours); 7. The tile adhesive should be applied evenly and fully, and the thickness of the adhesive layer should be approximately The tooth pitch of the toothed scraper is half the height.
What should you pay attention to when using ceramic tile adhesive? What should you pay attention to during the caulking process? Strictly controlling the caulking process can effectively avoid tile cracking. If you don’t know where to start, don’t be afraid. Apply online for Tuba. Rabbit Decoration Guarantee allows professional quality inspection personnel to strictly control every process in our decoration process!
The above is the introduction of tile adhesive made by the editor for everyone, I hope it can help you. For more information about the introduction of tile adhesive, please continue to pay attention to Tubatu Decoration.