Introduction: The automatic water dispenser does not mean that it can automatically discharge water. The automatic water dispenser is a new type of water dispenser, but there are certain differences between this type of water dispenser and traditional water dispensers. The automatic water dispenser can perform secondary deep purification of water and is also a small automatic drinking water terminal treatment equipment. The principle of an automatic water dispenser is different from other ordinary water dispensers. So what exactly is the principle of this automatic water dispenser? Let’s take a look. What is an automatic water dispenser
The automatic water dispenser is a new type of equipment that is different from bottled water dispensers and traditional water dispensers. When used, the automatic water dispenser removes impurities from tap water by using a filter. After filtering, the tap water is heated or cooled through a heat exchanger, so that the water can directly reach drinking standards. Therefore, people save more time and energy when drinking water, which is very suitable for factories, schools, and hospitals. and other large public places. What is the principle of the automatic water dispenser?
What is the principle of the automatic water dispenser? When working, after the 20-degree tap water passes through the exchanger, it absorbs the heat energy of the boiling water, and before entering the heater, it The temperature can reach 85 degrees Celsius. After entering the heater, it can be quickly heated from 85 degrees Celsius to 100 degrees Celsius. When an ordinary water dispenser heats the water source, it can only heat the water from 20 degrees to 100 degrees Celsius. The temperature it needs to heat is 80 degrees. Therefore, the heating speed of the automatic water dispenser is faster than that of the ordinary water dispenser. Say it faster. Advantages of automatic water dispensers
1. Health. The boiled water and warm boiled water of the automatic water dispenser have undergone multi-stage filtration and high-temperature sterilization, so that the warm boiled water can actually be cooled after boiling.
2. Power-saving, the heat exchange technology used in the automatic water dispenser allows drinking warm boiled water to save 80% of electricity. At the same time, its thickened insulation layer can also improve the insulation effect of the water dispenser.
3. Safety. Automatic water control technology means no water will come out unless the water is turned on, effectively preventing people from drinking raw water.
4. Zero pressure. The patented technology of the electric linkage valve in the automatic water dispenser allows the system to work under normal pressure, completely solving the potential safety hazards of pressure-type water dispensers. The difference between automatic water dispensers and bottled water dispensers
1. Energy saving. The heat exchange recovery technology in the automatic water dispenser changes the traditional phenomenon that boiled water can only be drunk after natural cooling. After the water passes through the heat exchanger, it can save a lot of water and electricity bills.
2. Easy to use. When in use, the automatic water dispenser will provide boiling and warm water when the faucet is opened, and there is no need to wait for water to be supplied automatically.
3. Hygiene. All pipelines are sealed and there will be no secondary pollution.
4. Accurate control. The stainless steel automatic water dispenser uses microelectronic control technology to make the water temperature control more precise and the water temperature display more concise and intuitive.
5. The water supply is large, which can fully meet the characteristics and needs of the collective population with large water consumption.