Suitable thermal decomposition products: medical waste (disposable syringes, infusion sets, cotton gauze, operating room disposal materials, residual limbs, rubber gloves, waste protective clothing and infectious and hazardous STD bedding, etc.). It uses magnetic thermal decomposition to pyrolyze organic waste, which is completely decomposed, smokeless and odorless. Exhaust gas emissions and other related indicators have reached the highest European standards. An automatic conveyor belt feeder or fully automated electrical control can be installed at the feed inlet to completely avoid secondary pollution caused by manual operation and reduce a lot of manpower. The principle design of magnetic thermal decomposition, the temperature in the furnace reaches 200℃~800℃, the flue gas is reprocessed, it is colorless, non-toxic and odorless, the decomposable materials are completely ashed, the volume reduction ratio is ≥97%; using imported thermal decomposition The equipment has stable performance, the furnace heats up quickly, there is no open flame, the garbage is fully decomposed, there is no secondary pollution, low noise, and no diesel is required, which greatly reduces the combustion operating costs of the system during the decomposition process. The decomposition chamber of this product is optimized for design, with high pyrolysis temperature, flue gas residence time ≥ 3 seconds; excess gas coefficient 100%, using secondary decomposition to greatly reduce the dioxin and carbon dioxide content of the flue gas.