Phosphating coated steel wire rope produced by patented technology gives priority to manganese series or zinc-manganese series phosphating. Compared with the production process of smooth steel wire rope, only the final wear-resistant phosphating process is added, which greatly improves the wear resistance and corrosion resistance of steel wire rope. The phosphatized steel wire rope is directly cold-drawn and twisted. At present, the fatigue test data show that the fatigue life of phosphating coated steel wire rope is about 3-4 times that of smooth steel wire rope with the same structure (under comparable conditions in laboratory), and it is still possible to improve it greatly with the research of wear-resistant phosphating formula. Manganese phosphating is wear-resistant phosphating, which can solve the wear problem of steel wire rope in use. Smooth steel wire rope is being eliminated, because phosphating coated steel wire rope is in short supply at present.
The price of phosphating coated wire rope is higher than that of smooth wire rope, but the unit use cost is lower than that of smooth wire rope. At present, the test data prove that the fatigue life of phosphating coated steel wire rope is 3-4 times that of smooth steel wire rope, and the service life of steel wire rope is proportional to the fatigue life. According to the approximate price of wire rope market, the price of manganese phosphating coated wire rope is about 1.4- 1.6 times that of smooth wire rope, and the service life is much longer than the price increase. Therefore, the daily average service cost of phosphating coated steel wire rope is only 30-45 times that of smooth steel wire rope.