The three pedals of a tractor are the clutch pedal, the brake pedal, and the accelerator pedal. The tractor has three pedals: the clutch pedal, the brake pedal, and the accelerator pedal.
1. The clutch pedal is used to control the clutch. It can be separated by pressing the clutch pedal, and can be combined by lifting the clutch. If you step on the brake pedal, the vehicle will slow down. If you step on the accelerator pedal, the throttle opening will become wider, and the number of engine revolutions will increase. The clutch is an important component in an automatic car, and this component belongs to the transmission system.
2. The clutch pedal is on the far left, which is a patent for manual gears. The clutch pedals of different models have different weights and heights, which also allows for different operating directions. Most of today's clutches use hydraulic assistance, but if air enters the hydraulic system, the clutch separation is incomplete, which will cause the problem that the gear cannot be installed.
3. The gas pedal on the far right is also called the accelerator pedal, which is used to control the speed of the car. It can control the amount of air in the engine cylinder. When you step on the accelerator pedal, the number of engine revolutions will increase and the power will increase. Increase the accelerator pedal, engine speed and power. In the middle is the brake pedal, which plays the role of slowing down and stopping the car. Different car types have different braking sensitivity and braking strokes, which are adjusted according to the manufacturer.