Different braking effects: The difference between the King Brake and the original brake master cylinder is that the Brake King has a better and softer braking effect and does not require a brake hub; while ordinary brakes cost a lot more brake pads and Brake hub.
The principle of Brake King is to destroy the original linear increase of air pressure during braking, directly ignore the section with low braking air pressure, and advance the air volume to make people feel better braking. The brakes are very sensitive when pressed lightly, and can easily lock up if pressed lightly. However, they become ineffective when pressed downwards, and consume a lot of tires.
Precautions for the brake master cylinder
When the brake is pressed, the piston in the brake master cylinder will be pushed by the brake pedal, and then act through the push rod to push the brake fluid through The oil pipe is transmitted to the piston of each brake cylinder, and then the brake shoe is pushed outward, causing friction between the brake pad and the inner surface of the brake drum, thus achieving the braking effect.
When the car is braking, if you feel that it suddenly fails for a moment, you need to observe whether there is any loss of brake fluid, and then check whether the master cylinder, wheel cylinder and oil pipe have any traces of braking. . If there is, it means that the brake master cylinder or slave cylinder has leaked seriously. You must repair it in time. You must know that the consequences of brake failure are very dangerous.