The method to clean the glue marks left by the car film is: 1. Wipe with a wet rag; 2. Spray with special glue removal lotion; 3. Clean with foam cleaner; 4. Wipe with vinegar, and use a scraper to remove the glue after the vinegar and glue are combined; 5. Wipe with wind oil; 6. Wipe with alcohol; 7. Use car insulation cleaner to remove the glue. The functions of the car film are: 1. Block the heat generated by infrared rays; 2. Block ultraviolet rays to prevent skin damage; 3. Safety and explosion-proof. The base layer of the film is polyester film, which is very resistant to tearing and breakdown; 4. Retain privacy and security; 5. Reduce air conditioning load; 6. Reduce accidents caused by glare factors.
Hello, the following methods are used to apply glue on car wraps:
Method 1: Blow hard with a hair dryer until it is hot to the touch, and then apply even force immediately to peel off the car wrap. Come down. The remaining glue can be sprayed with asphalt cleaner, leave it for a while and wipe it clean with a damp cloth, it's very easy.
Method 2: You can first use a wet towel to wet and soften the paper on the car sticker, and then rub it off. The remaining glue can be applied with wind oil, alcohol, or hand cream, and it can be wiped off, which is very useful for applying glue marks.
Method 3: Do not use cleaning agents for glass that has been filmed, because some chemicals may cause damage to the car film. In this case, use a towel dipped in a small amount of carburetor cleaning agent ( (such as alcohol, diesel), wipe the car logo repeatedly, but never spray carburetor cleaner directly on the glass, otherwise it will damage the car film. But it is worth noting that these are flammable items, so be careful about fireworks when using them.
Method 4: You can also use thinner to remove it easily.