Good wife, how about an electric clothes rack? How to install the wife's electric clothes rack?

Everyone needs to use some electrical appliances in their daily work and life. The appearance of electrical appliances has greatly facilitated people's life and work, enabling people to complete some tasks more quickly and simply. The electric clothes rack is such an electric appliance. The electric clothes rack can dry clothes by itself. There are many brands of electric clothes hangers on the market. This year, the hostess's electric clothes rack is particularly popular with people. The following small series will introduce the main performance and information of the good wife electric hanger in detail.

Good wife, how about an electric clothes rack?

The surface treatment adopts advanced technology, and the luster is no less than that of the new good wife after long-term use. The hanger has a unique anti-job-hopping device, which can permanently eliminate the latest patent silencing buffer and reduce the impact of the hanger on the top seat.

1, unique anti-job-hopping installation, which can eradicate the wire jumping back and forth forever.

2, good wife hanger unique automatic block heart-to-heart hand. As relaxed as a car.

3, the manual crank can quietly pull the shift, allowing you to experience simple and quick operation.

How to install a good wife's electric clothes rack?

One? Installation of hand crank:? The hand shake is generally installed on the right side of the balcony, which is convenient for habitual use. The distance from the ground is generally 120cm, depending on the user's height. Fix with expansion screws.

Two? Top seat installation:? At the top of the balcony to be installed, measure the diameter of the lighting lamp at the top of the balcony with a steel ruler, and then mark the installation between the two sides of the lamp 15cm-30cm (the length depends on the size of the balcony). Then measure the distance from the mark to the balcony edge, and determine the width of the top seat installation according to this distance. Then measure the length of the balcony with the lamp as the center. According to the length of the clothes drying rod, determine that both sides of the lamp are equally divided into 80 cm- 100 cm, and then there are four intersections with the measuring distance of the width, which are the installation positions of the top seat of the clothes hanger. After the position is determined, drill a hole with an electric drill. After drilling, fix the four top seats with expansion screws (if the rod length exceeds the normal size, adjust the distance accordingly).

Note: The two top seats near the crank angle are movable ends. The other two top seats are fixed seats. The difference between them is that. The movable seat is two-wheeled, and the movable seat must be installed in the front.

Three? Installation corner: corner can be installed on the top of balcony or wall. The corner is 50-70cm away from the movable top seat, and the middle of the movable top seat must be triangular (45-degree angle), keeping the same vertical line with the installation position of the crank. Please refer to the drawing.

Four? Steel wire connection: A hanger has two steel wires. Take out one first. First, pass one end of the steel wire through the bearing steel wire groove at the corner, then through the bearing steel wire groove at the top of the movable end top seat, and then through the bearing steel wire groove at the fixed end top seat, so that the steel wire is vertical to the ground, and then insert the top cover from the steel wire to clamp the top seat cover. The other end of the steel wire also passes through another hole of the bearing steel wire groove at the corner, and then passes through the bearing steel wire groove of another movable wheel of the movable seat (below the same top seat) so that the steel wire is vertical to the ground, and then the top cover is inserted through the steel wire and clamped. (Other steel wires are installed in the same way).

Five? Dry connection: at the first end of each steel wire, thread a hanging ball and tie a knot on the hanging ball; Then pull the hanging ball to the top seat, and then pull the steel wire from the corner to form a double-stranded steel wire, which is clamped at one end of the handle; Loosen the steel wire on the crank and drop the ball. Pass the air rod through the hanging ball, and then tighten it at the hole of the hanging ball. Nail screws; Finally, plugs are installed at both ends of the drying rod.

I believe that after reading Bian Xiao's introduction, you should understand the various performances of Goodwife's electric clothes rack. Bian Xiao suggested that we should pay attention to the standard method and maintain it regularly when using the electric clothes rack of Goodwife. Only in this way can you ensure that the electric clothes rack of Goodwife can prolong its service life and save some time and expenses for maintenance and use. I hope Bian Xiao's suggestion can help you make better use of Mrs. Electric Dryer, thus facilitating your daily life.